Used Lathes in Lombardy, Italy

Trusted Seller
MERLI CLOVIS 50 - 640 x 11000 LATHE
- used
- Manufacturer: Merli
- Model: CLOVIS 50
Complete with: - n. 1 four jaws table Ø 900 mm. - n. 2 saddles - n. 2 closed steadies - n. 2 open steadies
Arluno, Italy
Trusted Seller
WICKMAN multi-spindle lathe 1″ 3/8-6
- used
- Manufacturer: Wickman
Multi-spindle automatic lathe 6 spindles Bar diameter: Bar feed: 6 cross slides of which: Spindle speed: 132-2000 rpm. Devices and Accessories: Pickup - Hose cover - Chip conveyor -Hose+plant. Example of parts pr...
Canegrate, Italy
Trusted Seller
CAZENEUVE LATHE
- used
- Manufacturer: Amutio - Cazeneuve
Cazeneuve lathe length 700, tip height 20, bar passage 40, Dimensions: 210x105x150 (h) cm. Weight 1150 kg
Gavardo, Italy
Trusted Seller
1983 SCHÜTTE SF26-6 L multi-spindle lathe
- used
- Manufacturer: Schutte
Multi-spindle automatic lathe No. 6 spindles Bar diameter: 26 mm Diameter between spindle axes: 224 mm. Max bar feed: 80 mm. Special bar feed: 160 mm. Longitudinal slide travel: Spindle speed Working times: Devic...
Canegrate, Italy
Trusted Seller
WICKMAN multi-spindle lathe 1"-6 S
- used
- Manufacturer: Wickman
Bar diameter: Feed stroke: Approach travel on main tool block: Normal: 63.5 mm - Special: 50.8 mm. Cross slide feed stroke: Motor 11 kw at 1450 rpm. Spindle speed range: 247 ÷ 300 rpm Cycle time range: normal 2.4...
Canegrate, Italy
Trusted Seller
I.T.S. TCA301 single-spindle lathe
- used
Single-spindle automatic lathe Devices and Accessories: Footplate Year of production:
Canegrate, Italy
Trusted Seller
GIANA GF 12 CNC FACING LATHE
- used
- Manufacturer: Giana
Retrofitted in 2000. Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 900 mm. - automatic square turret - chipconveyor - full-covered
Arluno, Italy
Trusted Seller
1996 STAR sliding headstock lathe mod. SW7
- used
Automatic sliding headstock lathe Spindle speed: 600 - 12,000 rpm. Maximum diameter that can be turned: 7 mm Tailstock: Capacity: Guide bush: Collet type: S10 mod. 580 Tool bar size: 8 x 95 to 120 mm Total tools:...
Canegrate, Italy
Trusted Seller
MERLI CLOVIS LATHE 1000X170
- used
- Manufacturer: Merli
COMPLETE WITH SELF-CENTERING, TOOL TURRET AND 2 LUNETES ROTATING TAILSTOCK, TESTED SPEED CHANGE OK FEEDBACK OK FILLETS OK WATER PUMP ONLY CLEAN NO PLATEAU DIMENSIONS 200X600X1400H WEIGHT 13Q. APPROXIMATE DATA
Lombardy, Italy
Trusted Seller
1999 SCHUTTE SF51/6 S multi-spindle lathe
- used
- Manufacturer: Schutte
Multi-spindle automatic lathe 6 spindles. Speed Bar passage: Turning length: 351 mm. Collet size: 51 mm max. Axis travel: Devices and Accessories: High pressure - Electrical cabinet - Chip conveyor - Hydraulic po...
Canegrate, Italy
Trusted Seller
Auction
PADOVANI LABORATORY E275X2000 Self-learning lathe
- used
- Manufacturer: Padovani
FAGOR control
Terno d'Isola, Italy
Visit Auction Website
Trusted Seller
2014 NEXTURN SA 20P sliding headstock lathe
- used
Max. turning bar diam: 20 mm Max turning length: 250 mm Max. drilling/tapping spindle: Ø 10 mm/M8 Max. counter spindle diam: Ø 20 mm Max. drilling/tapping: Max. transverse disk milling: Ø 32 mm Total number of to...
Canegrate, Italy
Trusted Seller
LABOR LATHE
- used
Labor lathe length 1000 mm, bar passage 42 mm, tip height 180 mm. Accessories: 1 plotou and 1 4-jaw chuck. Dimensions 230x 140 X 90 (H) cm, Weight 1300 kg
Gavardo, Italy
Trusted Seller
COLCHESTER LATHE
- used
- Manufacturer: Colchester
Colchester Mascot 1600 lathe, length 2500 mm. Tip height 250 mm, Bar passage 78 mm. Overall dimensions: 420x100x150 (h) cm, weight 2500 kg. N.B.: THE OPTICAL LINE ON THE Y AXIS RELATIVE TO THE DIAMETER WORKS, TH...
Gavardo, Italy
Trusted Seller
GIANA GF 12 CNC FACING LATHE
- used
- Manufacturer: Giana
Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 500 mm. - automatic square turret
Arluno, Italy