Used Lathes in Lombardy, Italy

Trusted Seller
CRAVEN 80,5 FOUR SLIDES BED LATHE
- used
- Manufacturer: CRAVEN
Complete with: - n. 1 four jaws table Ø 3.660 mm. - n. 2 closed steadies Ø 305 ÷ 1.016 mm. - n. 2 special supports for crank shafts - upper saddle for threading - crank shafts turning device
Arluno, Italy
Trusted Seller
Auction
URSUS 250 Parallel Lathe
- used
Drill height 250 mm, maximum working length 3000 mm, spindle bar passage 105 mm
Medolago, Italy
Visit Auction Website
Trusted Seller
1985 INDEX MS25 multi-spindle lathe
- used
Multi-spindle automatic lathe Devices and Accessories: Example of parts produced:
Canegrate, Italy
Trusted Seller
GRAZIOLI DANIA 300 x 3000 LATHE
- used
- Manufacturer: Grazioli
- Model: DANIA 300
Complete with: - d.r.o. - n. 1 table Ø 500 mm. - n. 1 self centering chuck Ø 380 mm. - n. 1 closed steady - safety protection
Arluno, Italy
Trusted Seller
TACCHI FTC 56 x 5000 LATHE
- used
- Manufacturer: Tacchi
Complete with: - n. 1 four jaws table Ø 800 mm. - n. 1 closed steady
Arluno, Italy
Trusted Seller
TRAUB TB60 Single Spindle Lathe
- used
- Manufacturer: Traub
- Model: TB60
Bar Passage: Max workpiece diameter: Drill tailstock: Tooling: Motor power: Main motor: Power: 2.9/4.3 kW - Speed: 700/1400 rpm - Feed motor: Power: 0.37/0.75 kW - Speed: 700/1400 rpm - Total installed power: 5.4...
Canegrate, Italy
Trusted Seller
SCHÜTTE SF42-6 multi-spindle lathe
- used
- Manufacturer: Schutte
Fully overhauled multi-spindle automatic lathe No. 6 spindles. Bar diameter: 42 mm Diameter between spindle axes: 340 mm. Max bar feed 125 mm. Special bar feed: 290 mm. Longitudinal slide travel: Cross slide stro...
Canegrate, Italy
Trusted Seller
SCHUTTE SF32-6 multi-spindle lathe
- used
- Manufacturer: Schutte
Multi-spindle automatic lathe 6 spindles. Bar diameter: 32 mm. Diameter between spindle axes: 300 mm. Bar feed: Cross slide travel: Number of spindle speeds: 49 Spindle speed: min 200/min. - max 3150/min. Working...
Canegrate, Italy
Trusted Seller
INDEX B42 single-spindle lathe
- used
8-position tool turret No. 4 tool slides of which: Devices and Accessories: Miscellaneous accessories case Serial number: Year of manufacture:
Canegrate, Italy
Trusted Seller
WICKMAN 5/8″-6 multispindle lathe
- used
- Manufacturer: Wickman
6-spindle automatic lathe Bar diameter: Bar feed: Feed stroke on hexagonal block: 0 - 50.8 mm. Cross slide feed stroke: Lower: 0 - 12.7 mm - Upper: 0 - 12.7 mm - Intermediate: 0 - 8.9 mm Feed range at max. stroke...
Canegrate, Italy
Trusted Seller
FALCO REVOLVER LATHE
- used
- Manufacturer: TORNIO A REVOLVER FALCO
CLOSING WITH PNEUMATIC CLAMP 2 MANUAL TROLLEYS, Can THREADED WITH STANGA DIMENSIONS 1500X600XH1250 WEIGHT 450KGAPPROXIMATE DATA MACHINE SUITABLE FOR MAKING SMALL STANDARD PIECES, IT IS MUCH FASTER THAN THE TRA...
Lombardy, Italy
Trusted Seller
WICKMAN 5/8″-6 multispindle lathe
- used
- Manufacturer: Wickman
6 spindles Bar diameter: Bar feed: Standard: 0 - 88.9 mm - Special: 0 - 100 mm - Double bar feed Feed stroke on hexagonal block: 0 - 50.8 mm Cross slide feed stroke: Lower: 0 - 12.7 mm - Upper: 0 - 12.7 mm - Inte...
Canegrate, Italy
Trusted Seller
INDEX ER 25 Single Spindle Lathe
- used
Single-spindle automatic lathe Bar passage: Turret: Max length with one feed 70 mm. Max threading capacity Spindle: Speed 14-5750 rpm. No. speed with automatic control: 4. No. speeds: Main motor: 4 kw. Year of pr...
Canegrate, Italy
Trusted Seller
INDEX ER 25 Single Spindle Lathe
- used
Single-spindle automatic lathe Bar passage: Max thread capacity: Spindle: Turret: Year of production:
Canegrate, Italy
Trusted Seller
GIORGI GM 30 single-spindle lathe
- used
Single-spindle automatic lathe No. 5 carriages. Bar stop strut. Thread hole device. Tube + headstock. Year of manufacture:
Canegrate, Italy