Used Processing

Trusted Seller
Russel Finex Sieve, Model 17240, S/S
- Manufacturer: Russell
Russel Finex Sieve, Model 17240, S/S Used Russel Finex sive, model 17240, stainless steel construction, on base, .60 hp, 230/460 volt motor, serial# DF1605, built 1999.
Cleveland, OH
Trusted Seller
Quadro Comil, Model U10, S/S
- Manufacturer: Quadro
Quadro Comil, Model U10, S/S Used Quadro Comil , model U10, stainless steel construction, with mounted on adjustable height stand, xp rated, serial# U10-0108, built 2002.
Cleveland, OH
Trusted Seller
Mazzoni Billet Log Cutter, Type TVA/A
- Manufacturer: Mazzoni
Mazzoni Billet Log Cutter, Type TVA/A Used Mazzoni billet log cutter, type TVA/A, approximately 4.5" centers, set up for 9" center logs, serial# 1255, built 1984.
Cleveland, OH
Trusted Seller
LCI Marumerizer/Spheronizer, Model QJ 400T
- Manufacturer: LCI Fuji Paudal
LCI Marumerizer/Spheronizer, Model QJ 400T Used LCI QJ 400T Marumerizer/Spheronizer, Jacketed Bowl, 316 S/S contact parts, 4 Liter Nominal batch size.
Cleveland, OH
Trusted Seller
Crate of Components
- Manufacturer: federal equipment
Crate of Components Crate with used 6" butterfly valves, Swagelock and assorted fittings, etc.
Cleveland, OH
Trusted Seller
60" Kason Screen, 1 Deck, C/S
- Manufacturer: Kason
60" Kason Screen, 1 Deck, C/S Used 60" Kason screen, model K60-2-CS, carbon steel construction, 1 deck design, on base wiht 1 hp, 230/460 volt motor, serial# KCN-6031.
Cleveland, OH
Trusted Seller
Russell Sieve, model A16850
- Manufacturer: Russell
Russell Sieve, model A16850 Russell Sieve, model A16850. Serial number AS149.
Cleveland, OH
Trusted Seller
Blue Tech BT-06 Air Classifying Mill, 20 HP
- Manufacturer: BT
Blue Tech BT-06 Air Classifying Mill, 20 HP Used Blue Tech air classifying mill, model BT-06, stainless steel rotor and classifier wheel, with carbide tip hammers, 20 hp, 230/460 volt main drive, 3 hp, 230/460 vo...
Cleveland, OH
Trusted Seller
Premier HM-5 SuperMill Media Mill, C/S, 20 HP
- Manufacturer: Premier
Premier HM-5 SuperMill Media Mill, C/S, 20 HP Used Premier SuperMill media mill, model HM-5, carbon steel jacketed chamber and disks, approximately 6.5 liter gross capacity, 5 liter working capacity chamber, mech...
Cleveland, OH
Trusted Seller
PVA Dispensing Metering Module, Model Endurance
- Manufacturer: PVA
PVA Dispensing Metering Module, Model Endurance Used PVA Meter-Mix dispensing system, model Endurance, setup with Part A and Part B piston pumps with menu-driven HMI to control shot size, mix ratio, flow rate, pr...
Cleveland, OH
Trusted Seller
Dings Overbelt Magnet
- Manufacturer: Correa
30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.
$12,000 USD
Ohio, USA
Trusted Seller
Honeywell C7076A1007 Ultraviolet Flame Detector
- Manufacturer: Honeywell
“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933
$8,772 USD
Delta, OH
Trusted Seller
Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in
- Manufacturer: KOMAX
“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743
$6,500 USD
Delta, OH
Trusted Seller
Sankyo Oilless 405235-10 SUWC-180-3-130 Cam Unit Assembly
- Manufacturer: Sankyo
“New without Factory Packaging” Model number: 405235-10 SUWC-180-3-130 | Mpn: 405235-10 SUWC-180-3-130 | Shipping weight: 515 lbs | Shipping dimensions: 33 x 17 x 16 in | Reference sku: 1066169
$5,000 USD
Delta, OH
Trusted Seller
Yoshikawa CF-200TSR-DV Circle Feeder 200v-ac
- Manufacturer: Yoshikawa
“DIFFERENT CONFIGURATION” Model number: CF-200TSR-DV | Mpn: CF-200TSR-DV | Shipping weight: 144 lbs | Shipping dimensions: 41 x 22 x 19 in | Additional notes: DIFFERENT CONFIGURATION | Reference sku: 910577
$6,750 USD
Delta, OH
Engel ES 700 Injection Molding
- Manufacturer: Engel
- Model: ES 700
Good condition Engel ES 700 Injection Moldings manufactured in 1992. Located in USA and other countries. Click request price for more information.
USA