Machine Tools » Forging » Belgium

Building Filters

12

Used machine tools in Belgium

Trusted Seller
1983 Low pressure casting machine KWC / INDUGA
- used
- Manufacturer: KWC / INDUGA
Dimensions: Length: 6300mm; Width: 4650mm; Height: 1890mm Holding (35kW) and melting (105kW) possible Channel furnace INDUGA with 3 inductors Capacity: 11800kg; Melting capacity: 250kg/h With hydraulic unit RACIN...
Amel, Belgium
Trusted Seller
2017 Core shooter KLANN 5l; Hotbox
- used
- Manufacturer: KLANN
Machine completely hydraulic Dimensions: Length: 3800mm / 4650mm (incl. belt); Width: 1500mm; Height: 2500mm Incl discharge belt Belt width: 500mm; belt length: 1850mm, height from floor: 800mm Heating jaw dimens...
Amel, Belgium
Trusted Seller
2011 Crucible handling ladle FOUNDRY SERVICE 200kg
- used
- Manufacturer: Foundry Service
Dimensions: Length: 900mm; width: 1600mm; height: 1100mm Useful dimensions: Ø620mm; depth: 560mm Without gearbox, pouring by hand With CE
Amel, Belgium
Trusted Seller
Casting ladle MOZER 600kg
- used
- Manufacturer: MOZER
Overhauled by Foundry service in 2012 Dimensions: Length: 1500; Width: 950mm; Height: 1250mm Useful dimensions: Ø590mm; Depth: 640mm Planetary gearbox With 2 pouring spouts
Amel, Belgium
Trusted Seller
Casting ladle MARX 600kg
- used
- Manufacturer: MARX
Dimensions: Length: 1500; Width: 950mm; Height: 1450mm Usable dimensions: Ø630mm; Depth: 620mm With 2 pouring spouts
Amel, Belgium
Trusted Seller
Imac Forging 750 ton
- used
- Manufacturer: Imac
High Speed hydraulic Die Forging Press Capacity: 750 Ton New/ Unused, machine was never mounted... Stroke: 400 Max. opening: 810 Between coloms: 500 Table: 900 x 500 Power: 75 kW dimensions: 2800 x 2600 x 425...
Deinze, Belgium
Trusted Seller
Bêché forging hammer 2040 kgm
- used
- Manufacturer: Bêché forging hammer
Type: L9 Anvil weight: 750 kg Blow energy/punching power: 2040 kgm 100 automatic blows per minute Depth of throat: 575 mm Motorpower: 80 HP length: 3200 mm Width: 1450 mm Height: 3450 mm Weight: 33 ton
Deinze, Belgium
Trusted Seller
ZM 125 kg
- used
- Manufacturer: ZM
ZM 125 kg Punching power: 100 kg | Total weight: 6500 kg
Deinze, Belgium
Trusted Seller
ZM Duplex forging 60 kg
- used
- Manufacturer: ZM Duplex forging
Max opening: 300 mm Piston diameter: 250 mm Table: 600 x 400 mm Features a horizontal piston a vertical piston
Deinze, Belgium
Trusted Seller
Bêché forging hammer 400 kg
- used
- Manufacturer: Bêché
Type L7 diameter van de hamer: 300 mm snelheid: 125 slagen per minuut slagenergie: 1040 kpm maximaal open: 530 mm keeldiepte: 520 mm tafelafmetingen: 265 x 100 mm afmetingen: 2500 x 1350 x 2900 mm totaalgewicht: ...
Deinze, Belgium
Trusted Seller
Massey forging hammer 1530 kgm
- used
- Manufacturer: Massey
Type: 1.5 Blow energy: 1530 kgm Capacity: 580 kg Stroke: 685 mm 110 automatic blows per minute Diameter of ram: 320 mm Depth of throat: 650 mm Base plate: 2535 x 1455 mm Motor rating: 45 kW / 60 HP Total weight: ...
Deinze, Belgium
Trusted Seller
1984 Moulding line HWS; SPA30/S; 1000x750x300/300mm
- used
- Manufacturer: HWS
Moulding box centred and clamped 1 core insertion station with DALMEC manipulator SEIATSU moulding sand compaction With REXROTH hydraulic unit With SIEMENS S7 control cabinet Various cooling lines (min 150min) Wi...
Amel, Belgium