Used Processing in Wallonia, Belgium

Trusted Seller
Swing eductor plate EIRICH, Ø 3000mm
- used
- Manufacturer: Eirich
Year of construction: 1989, Weight : 1500 kg In very good conditio Gearmotor SEW type 720/12, 1460/23 rpm, 3,8/7,5 KW, 380 V Useful dimensions at the floor 1300 x 1300mm
Amel, Belgium
Trusted Seller
Rubberbeltconveyor, 32200 mm x 700 mm
- used
Weight ± 2800 kg Motor SEW type KA80DT112M4BGH, 1400/40 rpm, 4 KW, 220/380 V Rolling Ø 400mm, with motor for cleaning conveyor with brush With little hopper on the entry and others pieces of rubber for lenghtenin...
Amel, Belgium
Trusted Seller
Double grinder, Ø 600mm, continuous speed
- used
Motor (2x) ZIEGLER, type: N16b2, serial number: 1/5621 2/56716, 3 KW, 4 hp, 220/380 V, 2890 Hz 3 differents speeds by stepped pulleys With electriccontrol Continuous speed 45m/s
Amel, Belgium
Trusted Seller
1981 Melting furnace for brass FOMET, 1000 kg
- used
Channel, electric, fixed In good condition 1000 kg capacity total Output 700 kg, yield 220 kg/h With ventilator for cooling the transformer 220 V 2.2 KW With control cabinet, fume hood, primary voltage by auto-tr...
Amel, Belgium
Trusted Seller
1980 Green sand mixer EIRICH EBG4, with turbine
- used
- Manufacturer: Eirich
Construction year: 1980, weight: ± 2000 kg Gear motor 19 kW, 380 V Mixer capacity ± 375 l, output ± 7,5 t/h/turbine Gear motor for mix cup turning 4 kW, 380 V, 125 rpm Motor outlet flap 0,75 kW With control relay...
Amel, Belgium
Trusted Seller
Vibrating chute, length 12450 / 750 mm, VIMEC THOMAS LOCKER
- used
- Manufacturer: Vimec
Type: LH3020FS42F, serial number: 12934 On flat and spiral springs, belt drive Conveyor with stainless metal sheet
Amel, Belgium
Trusted Seller
Furansand mixer AXMANN 5 - 8 t/h, depends from motor/speed
- used
- Manufacturer: Axmann
Type: TM 5, Serial number: 5435 Year of construction: 1979, Weight : ± 1800 kg 2 Premix screws with a final turboscrew is a swivel mix arm without articulation Without pumps, with command box With bunker ± 1,5m³ ...
Amel, Belgium
Trusted Seller
Screw compressor 6,7 m³/min, SULLAIR
- used
- Manufacturer: Sullair
Type : BDS-45H, serial number : 68570022 Year of construction: 2001, Weight: 880 kg In good condition Output 6,7 m³/min 15580 operation hours With technical documentation
Amel, Belgium
Trusted Seller
Vibrating conveyor, 6800 mm x 600 mm
- used
Traction over 4 V-belts On spiral springs with plate springs (refer to dimension sketch in annex)
Amel, Belgium
Trusted Seller
Groundvibrator ZIMMERMANN SRA4
- used
- Manufacturer: Zimmermann
In good condition Table 1900 x 1400mm Weight: 5000 kg | Outside dimensions: 1900 x 1400 x 3300 mm
Amel, Belgium
Trusted Seller
Shake-out conveyer CHAUVIN 4000 mm x 900 mm
- used
- Manufacturer: Chauvin Arnoux
Type: Rol 36 External dimensions: 5500 mm x 1400 mm, h. 1800 mm Useful dimensions: 4000 mm x 900 mm, h. 330 mm Motor: 7,5 kW, 1440 rpm, 220/380 V
Amel, Belgium
Trusted Seller
Furnace loading conveyor UHDE
- used
Motor UHDE type SM20/4, 1,1 kW, 220 V, 1410 rpm Loading bunker upside width 1450mm, length 1900mm, h.1400mm Rotating on stewing ball ring
Amel, Belgium
Trusted Seller
Coresand mixer LAEMPE SM6 1,5 t/h
- used
- Manufacturer: Laempe / Röperwerk
Type: SM6-1,5T, serial number: 1496 Year of construction: 1998, weight: 2400 kg With resine and catalisator dosing With dosing screw Without electric control
Amel, Belgium
Trusted Seller
1977 Core sand mixer FORDATH 1000 kg, FORDATH, 700-900 l
- used
In good condition Useful capacity ± 700 at 900 l, pneumatic door on the side
Amel, Belgium
Trusted Seller
Sand conveyor 640 l, KLEIN
- used
Serial number : 2551/4, Weight : 400 kg Input Ø 200mm, exit Ø 100mm, with sensors, with pneumatic valve Price overhauled is with the control box
Amel, Belgium