Used Processing in Wallonia, Belgium

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2016 Melting and warm holding furnace STRIKO, 3000 kg, gas heated

• Manufacturer: STRIKO

With electric control SIEMENS TIA Portal With loadiung skip

2008 Core Shooter RÖPER FCS 25 HV-K

• Manufacturer: Laempe / Röperwerk

Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...

Mould for sand bend bars flexion test

For 6 bend bars Weight: ± 2 kg | Dimensions: length 370mm, width 250mm, height 45mm

2011 Pneumatic flap for silo outlet (2-way) switch

• Manufacturer: Jaudt

External dimensions: Length: 720mm; Width: 460mm; Height: 470mm

2009 Degassing unit (impeller) FOSECO

• Manufacturer: Foseco

Rotostativ Dimensions: Length: 1000mm; Width: 1850mm; Height: 2650mm 400V; 2KW With sword and additive dosing With Siemens control unit Without operator screen Is anchored to the floor

Core sand mixer 120l V&S

• Manufacturer: Vogel&Scheman

Pneumatic outlet flap Capacity: 120 litres

2001 Pouring ladle 3,5t BLUMENBECKER

• Manufacturer: Foundry Service

External dimensions: Length: 1900mm; Width: 1350mm; Height: 2150mm Internal dimensions: Ø1070mm; Depth: 1080mm With planetary gearbox With crane eye With traverse protection

Pouring ladle 1t MAS

• Manufacturer: MAS - Kovosvit

External dimensions: Length: 1400mm; Width: 980mm; Height: 1800mm Internal dimensions: Ø780mm; Depth: 800mm With planetary gearbox With crane eye With crossbeam protection

Dust filter BMD 17.400m³/h

• Manufacturer: BMD

Panel filter Pneumatic cleaning With silencer and chimney pipe (not self-supporting) With control unit With discharge flap (pneumatic)

Pyrometer HERAEUS Digilance V

• Manufacturer: Heraeus - Hanau - Vötsch

With Digilance V temperature probe Heraeus, Digilance V Length +- 1600 mm Temperature shown on the display

Casting ladle FOUNDRY SERVICE 3t

• Manufacturer: FOUNDRY SERVICE

Dimensions: Length: 1900mm; Width: 1350mm; Height: 1830mm Internal dimensions: Ø1020mm; Depth: 1030mm With splash guard With ladle book

2016 Shake out grid JÖST 2850 x 2250mm

• Manufacturer: Jöst

External dimensions: Length: 3100mm; Width: 2600mm; Height: 1500mm Internal dimensions: length: 2850mm; width: 2250mm; edge: 470mm On 4 silo blocks With 2 JÖST motors Unbalance drive JV286-2050 2 x 6kW; 1000rpm