Used Processing in Hamburg, Germany

Friedrich Goldmann Goden Gate 9635
- Manufacturer: Friedrich Goldmann
Bridge saw for natural stone Including saw blade set with diameters of 350-1,000 mm 2 peripheral milling cutters Including rotary table The required concrete foundations are not included in the offer. More used m...
Hamburg, Germany
1995 Spielvogel 1250
- Manufacturer: Spielvogel
Block saw with manual rotary table The machine received a completely new control system in 2022, which is why the operating hours display of 3683 is not correct. The drive motor was completely overhauled in 2022....
Hamburg, Germany
2006 Donatoni QUADRIX DV
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw Rotatable sawblade holder (0–180°) for the following cuts: Rigid cuts Cross cuts Bevel cuts Shaped cuts Curved cuts Fixed table (3,500 x 2,100 mm) made of robust steel construction. Max. sawblade diame...
Hamburg, Germany
2009 BRETON Countourbreton NC 260 K 23-
- Manufacturer: Breton
- Model: NC260
CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany
2017 INTERMAC Master 45-
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2004 BM Diamond 80L C800
- Manufacturer: B.M. Officine
- Model: Diamond
80 blades gang saw for marble Stroke 800 mm Cutting capacity 3200 x 2000 x 2000 mm Blade length 4,400 mm Engine power 110 kW Number 1 block trolley Number 2 block baskets Machine in good working condition (80 bla...
Hamburg, Germany
2011 Bacci Dino LPL 80/106-
- Manufacturer: Bacci
Calibration and polishing machine Maximum working width: 800 mm Maximum working thickness: 70 mm Calibration spindles: 1 Polishing spindles: 6 Calibration spindle power: 22 kW Polishing spindle power: 5.5 kW Work...
Hamburg, Germany
2002 PELLEGRINI DF JOLLY 2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. No. 2 + 1 axis (270° rotation axis, small wheels) Motorized and rotating carriage for multiple cuts (the ...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
1996 SIMEC Telaoi 80
- Manufacturer: Simec
Gatter for marble with diamond segments 80 saw blades, incl. 2 engine carriages Saw blade length: 4450 mm Power: 132 kW Voltage: 380 V – 50 Hz Frame stroke: 800 mm (extended frame stroke for standard gate saws: 6...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany