Used Eccentric Presses in Saxony, Germany

1998 O.S.G. T20 CE

• Manufacturer: O.S.G.
• Power requirement: 3.5 kilowatt

High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm

1969 Maskinexport nicht bekannt

• Manufacturer: Maskinexport

There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control.

1987 SMERAL LEN 63C

• Manufacturer: Šmeral Brno
• Model: LEN 63 C
• Power requirement: 7.5 kilowatt

Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refu...

WMW PKZE 2.5

• Manufacturer: WMW
• Power requirement: 0.4 kilowatt

Further details: - Control via 2-hand control panel or with foot pedal - Foot plates Ø 220mm

1974 WMW BLEMA-GOTHA PEE II 160

• Manufacturer: Blema
• Power requirement: 15.5 kilowatt

- single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand p...

1980 RHODES WAKEFIELD LTD. RF 100

• Manufacturer: Rhodes
• Power requirement: 10 kilowatt

WITHOUT drawing cushion Can be demonstrated in idle run. i.D.

1981 WMW BLEMA-GOTHA PEE I 250

• Manufacturer: Blema
• Power requirement: 23 kilowatt

further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device

1980 TACI ARRASATE PR. 90

• Manufacturer: Arrasate-Taci
• Model: PR 90
• Power requirement: 5.5 kilowatt

- single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D.

1985 WMW PEE II 160

• Manufacturer: WMW
• Model: PEE 160 II
• Power requirement: 15 kilowatt

- via two hand control - copy of documents digital available Machine can be demonstrated under power.

1976 WMW BLEMA GOTHA PEE (I) 250

• Manufacturer: Blema
• Power requirement: 20 kilowatt

- two hand control - operation panel accessory: - foot plate 2200x1500x40mm

1980 WMW ERFURT PEE 400-I

• Manufacturer: Erfurt
• Power requirement: 31.5 kilowatt

further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D.

EAW battery charger

Battery charger, battery charger EAW, ELEKTROSCHALTGERÄTE Dresden GL-D 24/63B Rated output voltage: : 24 V DC, 63 A 6,3 / 3,6 A IP20 used, tested !