Used EDM Machines in Illinois, USA

Trusted Seller
2007 Exeron EDM 316XXL MF20
- used
- Manufacturer: Exeron
EROWA ITS System Z axis travel: 24" | X axis travel: 74" | Y axis travel: 46" | Distance table to quill min/max: 9.8"/ 39.3" | Electrode weight max: 110 lbs | Workpiece maximum weight: 17,500 lbs | Work tank dime...
$79,500 USD
Get financing
Est. $1,496/mo
Chicago, IL
Trusted Seller
Auction
Mitsubishi SX10 Wire EDM
- used
- Manufacturer: Mitsubishi
- Model: SX10
Mitsubishi SX10 Wire EDM Advdescription: Mitsubishi SX10, X-13.8", Y-9.8", Z-8.6", 1.25" U/V, 23.2" x 20.2" Table, 1,168 lb. Table Capacity, 31.5" x 22.6" x 8.5" Work Tank, Mitsubishi CNC Control
Channahon, IL
Visit Auction Website
Trusted Seller
Auction
Elenix ST300 EDM Drill (2 Available)
- used
- Manufacturer: Elenix
Elenix ST300 EDM Drill (2 Available) Advdescription: Elenix ST300, X-12", Y-8", Z-12", 12" x 12" Table, 682 lb. Max. Workpiece Weight, 18" x 16" Work Tank, Elenix Control, (2) Available: s/n 83032, 83182
Channahon, IL
Visit Auction Website
Trusted Seller
Auction
Makino SP43 Wire EDM
- used
- Manufacturer: Makino
- Model: SP43
Makino SP43 Wire EDM Advdescription: Makino SP43, X-17.7", Y-11.8", Z-12.6", 3.9" U/V, 28.7" x 22.8" Table, 1,763 lb. Table Capacity, 28.7" x 22.8" x 11.8" Max. Workpiece Size, 35" x 33.5" x 15.9" Work Tank, Maki...
Channahon, IL
Visit Auction Website
Trusted Seller
Auction
Hansvedt 201 Sinker EDM
- used
- Manufacturer: Hansvedt
- Model: 201
Hansvedt 201 Sinker EDM Advdescription: Hansvedt 201, Sokki 2-Axis DRO, X-Pulse 201 Power Supply, 9" x 16" Table, 18" x 24" x 11" Tank
Channahon, IL
Visit Auction Website
Trusted Seller
2023 Titan EDM Force Series 1600
- used
- Manufacturer: Titan EDM
Machine Travel Dimensions Work Area Specifications Machine Tooling Specifications Machine Generator Specifications Utilities/Environmental Equipped With: 30 Station Automatic Electrode Changer CMC Programmable Ti...
$199,900 USD
Get financing
Est. $3,762/mo
Chicago, IL
Trusted Seller
1993 MITSUBISHI DWC90H CNC WIRE TYPE EDM
- used
- Manufacturer: Mitsubishi
- Model: DWC-90H
1993 Mitsubishi DWC90H CNC EDM. Pre-owned, 16"x20.1" table, 11"x9"x6" travel. Reliable precision for complex tasks. This 1993 EDM is in good working condition and can be seen under power.
Schaumburg, IL
Trusted Seller
AGIE CHARMILLES CUT 20P CNC WIRE CUT EDM MACHINE
- used
- Manufacturer: Agie - Charmilles
- Model: CUT 20
Agie Charmilles Cut 20P CNC Wire EDM Machine, S/N 057-008, New 2010 (ONLY 1,781 Hours), Specifications, SPECIFICATIONS:, TANK SIZE 41" x 30" x 22", TANK CAPACITY 52 Gal Clean/158 Gal Dirty, TABLE DIMENSIONS 27 " ...
Prospect Heights, IL
EDM DRILLMATE 22I
- used
- Manufacturer: EDM DRILLMATE
Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...
Oak Park, IL
2005 MITSUBISHI EDM FA10S
- used
- Manufacturer: Mitsubishi
- Model: FA10S
X: 13.8 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL
2003 MITSUBISHI EDM FA10M
- used
- Manufacturer: Mitsubishi
- Model: FA10M
X: 13.7 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL
2021 EDM DRILLMATE 22I
- used
- Manufacturer: EDM DRILLMATE
Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes
Oak Park, IL
Elox 8-2012 Sinker EDM Machine
- used
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
2022 MITSUBISHI EDM SV12P
- used
- Manufacturer: Mitsubishi
X: 15.7 in | Y: 11.8 in | Z: 11.8 in | Table size-w: 19.7 in | Table size-l: 27.5 in | Worktank inside dimensions: 37.4 x 27.5 x 17.7 | Max. workpiece dimensions: 35.4 x 25.6 x 13.8 | Max. workpiece weight: 2200...
Oak Park, IL
2014 MITSUBISHI EDM EA8S
- used
- Manufacturer: Mitsubishi
- Model: EA8S
X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.8 in | Table size-l: 19.7 in | Worktank inside dimensions: 31.5 x 20.5 x 11.8" | Max. workpiece dimensions: 30.3 x 19.3 x 7.9" | Max. workpiece weight: 1210 ...
Oak Park, IL
Makino U53J EDM machine
- used
- Manufacturer: Makino
- Model: U53J
Good condition Makino U53J EDM machines available between 2015 and 2018 years. Located in USA and other countries. Click request price for more information.
USA