Used Food & Beverage Processing in Flanders, Belgium

Cooking vessel 3.000L “Conrad Engelke”

completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Internal...

Vacuum Cooking-Stirring Tank “LKM Norderstedt”

Conical bottom Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Suitable for direct steam injection Suitable for vacuum With agitator Switch ...

“Terlet” Cooking line

• Manufacturer: Terlet

stirring system with scrapers Max.4 bar steam pressure Yoc 2010 incl. control box 1 x Lobe Pump Jabsco Incl. 2 steam control valves. RTK Platforms in stainless steel

Hot air oven “Meyn”, Type HAF 600/8000

• Manufacturer: Meyn

suitable for thermic oil heating adjustable temperature adjustable speed belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A

“Seamac” steam tunnel, Type Varicon 4-800

cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the ...

“Kersting” After Heating Tunnel

• Manufacturer: Kersting

net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating adjustable speed 120 kW mesh wire...

Linear oven “Formcook”, Type HSC 1075E

• Manufacturer: Formcook

all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system Modular construction system Conveyor belt (ope...

Linear oven 3 tiers “Provisur TST”, Type COO1350x6000

• Manufacturer: Provisur

all stainless steel completely isolated infeed conveyor outfeed conveyor belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed suitable for thermal oil heating

“FlowCook” Hot air oven “GEA-CFS”, Type FLC 14000/600

• Manufacturer: CFS/Koppens
• Model: FlowCook FLC14000/600

all stainless steel suitable for thermal oil heating belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid

Groninger Filling Line - Groninger - ZO001

• Manufacturer: Groninger

The Machine Come With: - Stoppering - Capping - Crimping

2003 SUCKER WE11

• Manufacturer: sucker

Sizing machine SUCKER MULLER type WE11 year of construction 02/2003, working width 2800mm, 10 drying cylinders 1800mm of those 6 teflon coated + 1 spare cylinder, single size batch, creel for 16 warping cylinders...

2000 INGERSOLL RAND IRT6000

• Manufacturer: Ingersoll Rand
• Model: IRT6000

Capacity [m³/min]: 100 | Pressure [bar]: 16 | Stars: Good | Outside condition: Good | Location machine: Belgium - EU

Capsule Filling Machine - NJP 1250 - CP.002.LZ

Power: 5 kW | Full load current: 12.8 A | Voltage: 3 P+PE 50 Hz 380 V | Dimensions: 870 x 1020 x 1980 mm | Weight: 900 Kg

Capsule Filling Machine - Capsugel - Ultra™ III - CP.001.LZ

• Manufacturer: Capsugel
• Model: ULTRA III

Power: 208-230 V ~ 3Ph + PE | Current load: 16 A | Frequency: 50/60 Hz | Over current device: 20 A | Rated short circuit breaking capacity: 10 kA | Mass: 610 Kg

Capsule Filling Machine - MG2 - Alterna 70N - CP.003.LZ

• Manufacturer: MG2

Power: 2.5 kW | Frequency: 50 Hz | Voltage: 400 V | Flow rate: 6 m³/h | Power factor: cos φ 0.85 | Pressure: 600 kPa | Weight: 950 Kg