Used Lathes in Saxony, Germany

Center point for lathes #10551

accompanying unused Made in Germany center point, center punch point, turning point for lathe center punch point Manufacturer: Length approx. 260 mm , diameter approx. 90 mm , weight approx. 4,5 kg Changes and er...

2010 DMG CTV 160

• Manufacturer: DMG Mori
• Model: CTV 160
• Spindle bore: 100 millimeter

Type of control: CNC | Control: SIEMENS SINUMERIK 840D ERGOline | Turning speeds: 20 - 6000 RPM | C-axis: Yes | Chuck diameter: 160 - 200 mm | C-axis speed: 0 - 100 RPM | C-axis division accuracy: 0,02° Degree |...

Three jaw chuck jaw chuck f. lathe or vice 200mm #25155

outside Ø 200 mm inside Ø 50 mm height 80 mm only the shown jaws available Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

1984 DECKEL GILDEMEISTER MD 3S

• Manufacturer: Deckel / Maho
• Model: GILDEMEISTER MD 3S
• Spindle bore: 73 millimeter

Type of control: CNC | Control: ELTRO MPULS | Turning diameter: 400 mm | Turning length: 600 mm | Swing diameter: 600 mm | Spindle bore: 73 mm

Tool holder for lathes and planes #B15615

Tool holder, workpiece holder, support used Manufacturer unknown Tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors in the technical data, specifications and prices ...

Tool holder for lathes and planes #B15616

Tool holder, workpiece holder, support used Manufacturer unknown Tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors in the technical data, specifications and prices ...

Steel holder for lathes and planes #B15617

Steel holder, tool holder, workpiece holder, support used Manufacturer unknown Steel holder, turning tool holder, tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors ...

2002 Weisser Univertor AS-400L

• Manufacturer: Weisser

1 CNC vertical lathe Weisser Univertor AS-90/400L, year of manufacture: 2002, serial no.: 177055269, inventory no.: 10-1100530-0, W/h: 16043.5, machine no.: 64, machine weight 11,000 kg, integrated into the autom...

Lunettes, pegs

• Manufacturer: Unknown

various steady rests, setting sticks, revolving or stationary for lathes

POTISJE PA 22

• Manufacturer: POTISJE
• Power requirement: 7.8 kilowatt

DLZ Lathe 4000 x 500 mm Turning diameter above the bridge: 480 mm Turning diameter without bridge: 670 mm Turning diameter over support: 280 mm Turning length: 4000 mm Main spindle bore: 62 mm Front bearing bore:...

1992 STANKO 1H658 813

• Manufacturer: Stanko

ex Works, loaded free, truck turning diameter over bed 1000 mm spindle diameter 128 mm turning length 8000 mm total power requirement 22 kW weight of the machine ca. 20 t dimensions of the machine ca. 11,0 x 2,2 ...

1993 STANKO 1H658-5

• Manufacturer: Stanko

ex Works, loaded free, truck turning diameter over bed 1000 mm spindle passage 128 mm turning length 5000 mm total power requirement 22 kW weight of the machine ca. 16 t dimensions of the machine ca. 7,8 x 2,3 x ...

BIOIBAR chip conveyor with coolant cleaning

Chip conveyor with coolant cleaning BIOIBAR Model 150.C.2" Drive motor: 0.37 kW 1375 rpm 220 / 380 V 3AC, 50 Hz Drive gearbox: MARTINENA TRANSMISIONES Transmission ratio: 1 : 171 Coolant pump1: Q: 400 l/min, H: 1...

1970 GEMA LZ 160

• Manufacturer: Gema
• Model: LZ 160
• Spindle bore: 40 millimeter
• Power requirement: 2.2 kilowatt

Threading possible: Metric, Withwort and modular thread Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change steel holder - Foot brake - Cooling water pump (exclusive feed)

2007 HAAS SL 30

• Manufacturer: Haas
• Model: SL-30

Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system avail...