2006 Long bending machine Biegemaster BS 4.2.0
- Manufacturer: Biegemaster
- Power requirement: 5.5 kilowatt
Used hydraulic bending machine with CNC touchscreen graphic control, Hydraulic material thickness adjustment, manual upper jaw preload, Motorized depth stop + conical stop, motorized roller shear. The machine w...
Hohenbrunn, Germany2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 millimeter
- Power requirement: 11 kilowatt
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany2010 Thalmann TD 200-6.4 double press brake
- Manufacturer: Thalmann
- Stroke length: 200 millimeter
Used Thalmann double bending machine, 5 finger grippers, Safety device: light barrier, Machine is sold as is, without warranty or functional test.
Hohenbrunn, Germany2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany- Auction
AMADA HFE 3i 1003L CNC Press Brake
- Manufacturer: Amada
- Model: HFE-3I 1003
• Original tools included • Safety light curtain (Fiessler Elektronik) • Machine manuals and reference documentation fully available • USB stick with digital manuals included • Very well maintained - due to the s...
Tuntenhausen, GermanyVisit Auction Website 2019 press brake Adira PM 022040
- Manufacturer: Adira
- Power requirement: 15 kilowatt
Like-new Adira press brake with CNC-controlled crowning, LazerSafe safety system, foot pedal, and standard tool set. The machine is in like-new condition, having only a few operating hours. It was never used bey...
Hohenbrunn, Germany2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
Hohenbrunn, Germany1991 Press brake EHT EHPS 150-3050
- Manufacturer: EHT
- Power requirement: 18.5 kilowatt
EHT hydraulic press brake, type EHPS 150-3050, with controlled axes: Y1, Y2, X, Z1, Z2, R, pneumatic die adjustment, motorized crowning, Accessories: 2 support arms, Tooling: Pointed punches with interchangea...
Hohenbrunn, Germany1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany2014 Long bending machine Jorns SL-300S-1250-RH-OV-DP-CP200
- Manufacturer: Jorns
Used Jorns swing-bending machine with the following features: • Reinforced version with additional stand unit • Deep draw with motorized depth stop system 1250mm, with 4 stop fingers • CNC touch graphics control ...
Hohenbrunn, Germany2006 Long bending machine Jorns ML 150-SW-SM-CP200-6.4-hs
- Manufacturer: Jorns
Used hydraulic Jorns swing bending machine with new CNC CP200 control (control upgrade in 2025), motorized depth stop with four stop units, hydraulic material thickness adjustment, manual upper jaw preload (crown...
Hohenbrunn, Germany1998 Jorns NL125-SM-CNC400A-6x1.25 long bending machine
- Manufacturer: Jorns
Used hydraulic Jorns swing bending machine, with hydraulic roller shear SM 1.5 and depth stop (4 stop fingers). With emergency stop rail, retractable sheet metal supports and controls on the swing arm. The machin...
Hohenbrunn, Germany1998 Long bending machine Jorns NL100-SM CNC400 6x1.25
- Manufacturer: Jorns
Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...
Hohenbrunn, Germany
Tip: Enter manufacturer, model or keyword
