Used Drilling Rigs in Kentucky, USA

Trusted Seller
2018 JUNJIN JD-800EII
- Manufacturer: Junjin
- Hours: 6,132 h
2018 JUNJIN JD-800EII CRAWLER VERTICAL DRILL, Cummins QSB6.7 Tier 4 Motor, 175hp, 6132 Hours, EROPS, AC, Backup Camera, Yamamoto YH80A Drifter with 2199 Hours, Kawasaki Variable Piston Hydraulic Pump, Carousel Ty...
$105,900 USD
Get financing
Est. $1,993/mo
Kentucky, USA
Trusted Seller
1999 SANDVIK D45KS
- Manufacturer: Sandvik
- Model: D45KS
- Hours: 26,358 h
1999 SANDVIK D45KS VERTICAL DRILL, Cat 3406E, 450hp, 26358 Hours, 29.5" Tracks, 60%, EROPS, Heat/AC, 95' 3x30' Drill, 6 3/4" Drill Bit, 1050/100 Air, Drill Has Been Gone Through Top to Bottom, Too Many New Parts ...
$140,000 USD
Get financing
Est. $2,635/mo
Corbin, KY
Trusted Seller
2013 Bayshore DH60
- Manufacturer: Bay Shore
Model: DH60 Year: 2013 Hours: 7,800 Comes with 2 Round Kelly Bars and one Square Kelly Bar
$325,000 USD
Get financing
Est. $6,117/mo
Kentucky, USA
Trusted Seller
2005 ATLAS COPCO ECM660 III
- Manufacturer: Atlas-Copco
- Model: ECM 660 III
- Horsepower: 260 hp
- Drill Pipe Diameter: 51 mm
Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours
$55,000 USD
Get financing
Est. $1,035/mo
Louisville, KY
Trusted Seller
2004 ATLAS COPCO ECM660 III
- Manufacturer: Atlas-Copco
- Model: ECM 660 III
- Horsepower: 260 hp
- Drill Pipe Diameter: 51 mm
3.5 – 4.5 Inch Class Montabert HC160 Drifter Very Well Maintained Unit 7036 Total Frame Hours 2251 Percussion Hours
Louisville, KY
2014 Soilmec SR-30
- Manufacturer: Soilmec
- Model: SR-30
- Horsepower: 200 hp
- Drilling depth: 37.7 m
- 120-ft max drill depth - Just under 10,400 hours - Cummins engine - 4x30 Kelly - 130mm sub size - Located in Mt. Sterling, KY
$175,000 USD
Get financing
Est. $3,294/mo
Kentucky, USA
2016 Soilmec SR30lhr
- Manufacturer: Soilmec
- Model: SR-30
- Horsepower: 200 hp
- Drilling depth: 37.7 m
This machine brings a powerful punch in a nimble package. Price recently reduced!
$397,500 USD
Get financing
Est. $7,481/mo
Kentucky, USA
2006 SANDVIK D25KS
- Manufacturer: Sandvik
- Model: D25KS
- Hours: 17,806 h
2006 SANDVIK D25KS Drill Rig on Track Chain Serial No.: 733017 Hours: 17806 CATERPILLAR C18 DIESEL ENGINE, Engine serial# - WJH01769 Compressor - 1060CFM /350 PSI SULLAIR ANGLEL DRILLING Drill was built and sold ...
$225,000 USD
Get financing
Est. $4,235/mo
Pikeville, KY
1993 INGERSOLL-RAND DM45E
- Manufacturer: Ingersoll Rand
- Model: DM-45E
- Horsepower: 600 hp
THIS INGERSOLL-RAND DM45E DRILL RIG MACHINE IS PARTS MACHINE. DM45E-S/N 3787 WE SOLD Engine, GEAR BOX with one pump everything else is on the drill to be sold as part. WE JUST REBUILT THE AIR COMPRESSOR PARTS NUM...
Pikeville, KY
2004 INGERSOLL-RAND DM45LPXL900
- Manufacturer: Ingersoll Rand
- Model: DM-45
- Hours: 29,234 h
2004 INGERSOLL-RAND DM45LP-XL900 LOW PRESSURE DRILL SERIAL NUMBER 7864 CAB WITH A/C, CUMMINS ENGINE 4 STEEL CAROUSEL DUST COLLECTOR ANGLE DRILLING AS OF NOV 1, 2022 WE HAVE REPLACED THE 2 SPOROCKS, 4 BOTTOM ROLLE...
$250,000 USD
Get financing
Est. $4,705/mo
Pikeville, KY
1997 INGERSOLL-RAND DML1200
- Manufacturer: Ingersoll Rand
- Model: DM-L 1200
- Hours: 1,355 h
1997 Ingersoll-Rand DML-LP 1200 S/N 7302 Cummins, A/C cab, 35 ft mast, 30 ft drill stem, dust collector, carousel, auto rod changer, 1200 cfm x 110 psi air comp, hyd stabilizers, fire suppression, fast fuel Just ...
$145,000 USD
Get financing
Est. $2,729/mo
Pikeville, KY
Trusted Seller
1984 INGERSOLL-RAND CM351
- Manufacturer: Ingersoll Rand
- Model: CM-351
HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe
Louisville, KY
Trusted Seller
2015 EPIROC FLEXIROC D60
- Manufacturer: Epiroc
DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.
$319,500 USD
Get financing
Est. $6,013/mo
Louisville, KY
Trusted Seller
2015 ATLAS COPCO FLEXIROC D60
- Manufacturer: Atlas-Copco
- Model: FLEXIROC D60
- Horsepower: 475 hp
- Drilling depth: 55.5 m
DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.
$319,500 USD
Get financing
Est. $6,013/mo
Louisville, KY
1998 INGERSOLL-RAND DM45E
- Manufacturer: Ingersoll Rand
- Model: DM-45E
- Horsepower: 600 hp
1998 INGERSOLL-RAND DM45E CRAWLER BLAST HOLE DRILL S/N 7282 A/C CAB CUMMINS 6 CYL 900 CFM 150 PSI AIR COMPRESSOR. 30FT MAST PART NUMBER 57501207, DUST COLLECTOR CAROUSEL AUTO ROD CHANGERS 3 HYDRAULIC STABILIZER H...
$85,000 USD
Get financing
Est. $1,600/mo
Pikeville, KY
Tamrock Ranger 800 Drilling Rig
- Manufacturer: Tamrock
- Model: Ranger 800
Good condition Tamrock Ranger 800 Drilling Rigs manufactured in 2018. Located in USA and other countries. Click request price for more information.
USA