Used Conveyors in Wallonia, Belgium

Conveyor belt

Including vertical bunker, dimensions approximately 134x105x270cm

Vibrating elevator conveyor REMEX outlet height 4150 mm

Type : Tu 206-850, serial number: 961149 Conveyor lenght ± 60m with water cooling Tube Ø 42mm

Roller conveyor

Roller conveyor

Steep conveyor belt HEIDELBERGER

• Manufacturer: Heidelberg

Useful dimensions: total width of the band 500 mm, useful width 300 mm Gearmotor BAUER, 3 hp, 1420 /91 rpm, 220/380 V

Conveyor - Groninger - MRT 105 - DK2105.WG

• Manufacturer: Groninger

Steep conveyor belt for chips

Dimensions: Length: 1100mm; Width: 640mm; Height: 900mm 0,25kW On wheels Belt consisting of metal plates

Alimentation UPS, Feeding UPS, Conveyor - DK2277.WG

Belt conveyor 3100 x 800mm

Drum motor BAUER Without iron feet where the belt above or below runs Conveyor more or less well Belt width 970 mm, Ø 220mm

Belt conveyor 800/475 mm

Gearbox LEROY SOMER, 4 kW, 220/380 V, 1425/11,82 rpm For pieces, sand, waste With security lines

Rubber belt conveyor for cores ± 31,5m

Dimensions : Longueur : ± 31500mm ; Largeur : 850mm ; Hauteur : 1150mm Dimensions utiles : longueur : 31500mm ; largeur : 645mm ; hauteur utile : 900mm With on/off switch With emergency stop switch 2.2kW;380V Bel...

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Screw conveyor 1020 mm, Ø 150 mm

Useful length 1020 mm, Ø 150 mm Gear motor BAUER 0,5 hp, 1420/33, 5 rpm, 220/380 V Chaine drive Motor sidewards With filling hole 440 mm x 350 mm With flange for screwing on bunker

Screw conveyor 3140 mm, Ø 150 mm

Useful length 3140 mm Axle base between entrance and exit 3140 mm Inside Ø screw pipe 150 mm Entry and exit on ball joint With gear-motor, type R2320109ES1, 1400 rpm Inspection door has entry 180 mm x 100 mm Ente...

Screw conveyor 2800 mm, Ø 150 mm

Useful length 2800 mm, Ø 150mm 2 kW, 1425 rpm, 220/380 V, 9/5,2 A Entry 570 mm x 370 mm Exit Ø 210 mm