- Trusted Seller
2008 Arm-Tec Spinmaster CL
used
- Manufacturer: Arm-Tec
The Machine is a 16m Classic Version, consisting of 15m mobile rebar feeding area, pulling unit and 16m roll mat macine. The machine has been completely refurbished by Pedax in 2014 both mechanically and electric...
Oraiokastro, Greece - Trusted Seller
2003 Galanos SA – Kiklops VR32/3/RB001
used
- Manufacturer: Kiklops Galanos
Automatic Cutting Plant consisting of an easily connected to the main body bundles’ storage area of 10 compartments, and the machine main body which runs on rails in order for the pulling unit to align with the c...
Oraiokastro, Greece - Trusted Seller
2000 Schnell SpA Optibat 65T/3/12
used
- Manufacturer: Schnell
The machine has been refurbished: The Front Part (3 Corridors of Conveyor Rollers) has been changed – NEW The Train Motor has been replaced – NEW The Break Motor has been replaced – NEW All Rollers were replaced...
Oraiokastro, Greece - Trusted Seller
2008 Pedax GmbH Combiline G
used
- Manufacturer: Pedax GmbH
Automatic Cutting Bench consisting of a mobile rebar storage area, the machine main body with the stopless measuring and pull-in feeding system, the hydraulic guilotine cutter, the Siemens S7 panel PC, and the ro...
Oraiokastro, Greece - Trusted Seller
2002 Pedax GmbH Combiline + Permatic
used
- Manufacturer: Pedax GmbH
The Center consists of: 1. Combiline in turn consisting of a. Mobile rebar storage area 12m, 5 slots, b. Hydraulic plant and electrical board, c. Shear unit, with control console, and 12m run-off kicking of...
Oraiokastro, Greece 
Machinery
new
Description Technical characteristics STEEL No.2 HSS discs diameter 350 mm, thickness 2.5 mm T4 Z=280 D.32 for standard and stainless steel (thickness up to 3 – 4 mm) Vertical sliding head on prismatic guides wit...
Thessaloniki, Greece
Cutting lines
new
Description The presence of automatic templates prevents pausing the machine to adjust support tools for non-fixed profiles. The operator only has to load the bars onto the feed station and unload the cut element...
Thessaloniki, Greece
Lines
new
Description The TTK 1000 system is suitable for medium-high production. The presence of machine translation between the 2 toothed tools and the unloading file downstream of the assembly allows the manual movement...
Thessaloniki, Greece
Cutting lines
new
Description The fully electronically controlled line produces window dividers and curtains using a cutting machine with a front-exit cutting disc drive. The operator simply loads the bars and unloads the machined...
Thessaloniki, Greece
Cutting lines
new
The fully electronically controlled line produces machined finished products to size using a feed bar and a cutting machine with a rear exiting cutting disc drive. The operator simply loads the bars and unloads t...
Thessaloniki, Greece
Tip: Enter manufacturer, model or keyword