Used machine tools in Germany

SUNNEN MBB1650 honing machine

• used

• Manufacturer: Sunnen
• Model: MBB-1650

Serial Number: 50425 Pool dimensions: 700 x 400 x 200 mm Incl. small item of matching accessories

SUNNEN MBB-1600 EH Honing Machine

• used

• Manufacturer: Sunnen
• Model: MBB-1600

Serial Number: 40860 Jaw dimensions: 570 x 380 x 50 mm

Gear honing machine PRÄWEMA SyncroFine 205HS-A-W

• used

• Manufacturer: Präwema

1999 Honing Machine INA Schaeffler IBA 82412 |

• used

• Manufacturer: INA Schaeffler

Item Description/Artikelbeschreibung: Lot consists of: (1) Honing Machine Position besteht aus: (1) Honmaschine Technical Details/Technische Details: English: was used for the Processing of Outer Rings Deutsch: w...

2000 GEHRING ES4-1000-45 NC

• used

• Manufacturer: Gehring
• Model: ES4-1000-45 NC

4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12.3mm -13.3mm -21.1mm

2000 NAGEL 2VS5-30RA

• used

• Manufacturer: Nagel
• Model: 2VS5-30RA

Machine is like new. -pre-honing with electromechanical expansion -measuring -finish honing with electromechanical expansion -measuring Clamping for piston housings are on the machine. Of course other parts can b...

2002 NAGEL 2VS10-60 RA

• used

• Manufacturer: Nagel
• Model: 2VS 10-60

2 honing spindles -both with two step expansions mechanic / hydraulic -Rotary table with 4 stations. 2 x 180 ° or 4 x 90 ° -air gage measuring made for honing liners with max diameter 120mm Machine is like new be...

2010 THIELENHAUS CenterStar LC14 1113-235156

• used

• Manufacturer: Thielenhaus

tape Control type: CNC | Control name: Siemens | Freight basis: FCA | Workpiece diameter: 60 mm | Circumferential diameter: mm | Workpiece length: 680 mm | Total power requirement: kvA | Machine weight approx.: 3...

2013 SUPFINA 622/1 1113-215123

• used

• Manufacturer: SUPFINA

Control type: CNC | Control name: Siemens 840D | Freight basis: FCA | Workpiece diameter: mm | Circumferential diameter: 80 mm | Workpiece length: 450 mm | Total power requirement: kvA | Machine weight approx.: ...

2000 NAGEL SCD 200 1113-235072

• used

• Manufacturer: Nagel

Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...

1990 SUNNEN MBC-1800 - G 1113-210007

• used

• Manufacturer: Sunnen

Control type: conventional | Freight basis: FCA | Honing: mm | Hub: mm | Tip height: mm | Total power requirement: kW | Machine weight approx.: 1 t | Space requirement approx.: 2 x 2 x 2 m

GEHRING P350-31P 1113-22432

• used

• Manufacturer: Gehring

Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm

1980 KADIA 3VPH 60/250 R

• used

• Manufacturer: Kadia
• Model: 3VPH 60/250 R

Diameter 6-60 At the present time, the machine tool does not meet the basic safety and protection requirements as specified in the BetrSichV 2015. An increase of the required minimum protection target is to be de...

GEHRING Z 350-125

• used

• Manufacturer: Gehring
• Model: Z350-125

Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block The machine tool does not currently meet the basic safety and protection requirements as specified in the Bet...