Used Processing in Indiana, USA

Vespa Sabbiatrici VSP 200 Sandblasting Machine 200L 12 Bar Blasting Tank Only

• Manufacturer: Arena

Used, in Good Working Condition. Removed From a Working Environment. Still has some sand on the bottom. Top load hopper. Side cleanout. 200L (50 Gal) 12 bar. If this item ships as Flat Rate Freight please see det...

Donaldson 24 Torit Cyclone Dust Collector 4 Bag Filter 7.5HP 3500 CFM 2-Drum

• Manufacturer: Donaldson / Torit / DCE

Used, in good clean condition. Tested in our shop. No tag on this one. Size matches a Model 24. 1,950 - 3,500 CFM. Made for 55 gallon drums. 2 Lids are Included. No filters or bags. 7.5Hp 230/460V. Wired for...

Smog Hog Porta-Clean Portable Air Cleaner Smoke Extraction Fume Mist 120V

• Manufacturer: United Air Specialists

Tested in good working condition The arm duct is missing. Older unit. 8" Duct input. This still has the support arm to move and hold mobile duct. Filters may need to be replace. 115 volt 1 phase If this item ship...

Fuji NMT-16 Fujiclon Dust Collector Baghouse NM 16 Filters Stainless 36x36x63"

• Manufacturer: Fuji

Used, in Good Working Condition. This is the baghouse with 16 filters 48" long. This is 63" high or 1600mm Pneumatic filter blowoff system. Solenoids and control panel. If this item ships as Flat Rate Freight ple...

Clean Air America STR 6 Streamer Welding Dust Collector 10Hp 480V Pulser Filter

• Manufacturer: Clean Air

Used, in Good Working Condition. Tested. This unit is used to clean welding and manufacturing dust and smog. NANO Filter PLC for auto Pulser may not be working. It may be operator error or the filters are not clo...

Clean Air America STR 6 Streamer Welding Dust Collector 10Hp 480V Pulser Filter

• Manufacturer: Clean Air

Used, in Good Working Condition. Tested. This unit is used to clean welding and manufacturing dust and smog. NANO Filter PLC auto Pulser is not working at this time. Should be a minor fix. PLC powers up and works...

Clean Air America STR6 Streamer Welding Dust Collector 10Hp 480V Pulser Filter

• Manufacturer: Clean Air

Used, in Good Working Condition. Tested. This unit is used to clean welding and manufacturing dust and smog. NANO Filter PLC auto Pulser is not working at this time. Should be a minor fix. PLC powers up and works...

Clean Air America STR 6 Streamer Welding Dust Collector 10Hp 480V Pulser Filter

• Manufacturer: Clean Air

Used, in Good Working Condition. Tested. This unit is used to clean welding and manufacturing dust and smog. NANO Filter PLC auto Pulser is not working at this time. Manual pulse works fine. Should be a minor fix...

Donaldson 75 Torit Cabinet Metal Dust Collector 1Hp 3Ph Motor 230/460V

• Manufacturer: Donaldson / Torit / DCE
• Model: 75
• Noise level: 75 dB

Used, in Good Working Condition, Tested OK. Unit looks better on the inside than outside. Foot pedal bag shaker. 1 Hp motor 230/460V. This unit is wired for 460V. If this item ships as Flat Rate Freight please se...

Fumex FA2SSD Dust Collector High Efficiency Air Cleaner Fume Extractor 120V 12A

• Manufacturer: Fumex

Used, in Good Working Condition. Tested. Will need a new air filter. Looks to be in rough shape. This was setup on a remote switch of some kind. Will need to energized with 12VDC to turn on. If this item ships as...

Superior 30x80

Dry sand processing plant, Location: Texas, United States, Asking price: contact us for the price., Item details, One (1) used and partially dismantled dry sand processing plant with:, • One (1) used Excel Machin...

1992 Howe Baker .

• Manufacturer: Baker

Howe Baker hydrogen gas generating plant. Capacity 83,000 scfh (2 million scfd). PSA system with 4 psa columns, Includes reformer, waste gas steam generator boiler, vent gas tank, natural gas compressor, gas t...

2025 Earthworm Conveyors 36x110

PIT PORTABLE RADIAL STACKER, 36” x 120’ 1200 TPH, • 48” Deep Truss, 3x4x5/16 Cord Angle, 2x2x1/4 Lattice, • Low profile tail, (Approximately 42”), • Heavy Duty Undercarriage, 10x10 Tubing Axle, 20” Tires Regroved...

2025 Earthworm Conveyors 30 X 800

• Manufacturer: Earthworm

30 x 800 TRUSS FRAME CONVEYOR , • Structures, o 24” Deep Truss – HEAVY-20 ft Head/20 ft Gravity Take-up (40 ft Total), ? 3 x 4 x 5/16 Cord Angle, ? 2 x 2 x ¼ Lattice, o 24” Deep Truss – BALANCE, ? 2 x 2 x ¼ Cord,...

2025 Earthworm Conveyors 30 X 1350

• Manufacturer: Earthworm

30 x 1350 TRUSS FRAME CONVEYOR, • Structures, o 36” Deep Truss – 20 ft Head/20 ft Gravity Take-up (40 ft Total), ? 3 x 4 x 5/16 Cord Angle, ? 2 x 2 x ¼ Lattice, o 24” Deep Truss – TAIL – 20 ft, ? 3 x 3 x ¼ Cord, ...