Processing » Nara

Building Filters

Related Events

Live Now

DermaRite Facility Shutdown Auction

by Federal Equipment - Auctions (Proxio Group)

Online
Ends Feb 5th, 15:00 CST
View event
105

Used Processing in Nara, Japan

  • no-image_en.png

    2022 Kuraray MR-22

    • Manufacturer: クラレ

    Nitrogen generation capacity 40 Nm3 (99.99%) AC100V/50/60Hz 1700*100*1700mm

    Nara, Japan
  • no-image_en.png

    2012 Tamura TNV25-508EM

    • Manufacturer: Antom

    Left→Right (fixed front) Nitrogen type 0.8 zones, (Atmospheric type usable. Air supply) Substrate Max: 250mm With slip prevention Top of parts 20mm / Bottom 30mm HDD-free PC External monitoring Individual inverte...

    Nara, Japan
  • no-image_en.png

    2006 Hitachi OSP-37V6AII

    • Manufacturer: 日立

    Motor: 30kw/60HP 200V 60Hz Press: 0.68MPa Inverter specifications Screw-type compressor

    Nara, Japan
  • no-image_en.png

    2005 Techno Design TOP-355

    • Manufacturer: テクノデザイン

    Standalone Desktop Spot and Eutectic Solder. Spot Soldering Machine Solder-in (Eutectic Solder) Solder jet height adjustment Temperature control Solder-in (Eutectic Solder)

    Nara, Japan
  • no-image_en.png

    2007 Techno Design TOP-375

    • Manufacturer: Senju

    Stand-alone tabletop spot and lead-free . Spot soldering equipment Solder-in (lead-free) Solder jet height adjustment Temperature control Solder-in (Pb-free)

    Nara, Japan
  • no-image_en.png

    2003 MITSUI SEIKI Z116AS3-R

    • Manufacturer: 三井精機

    Power ..11Kw Discharge air volume… 1.8m3/min Discharge pressure… 0.7MPa Specifications… Built-in air dryer, air-cooled Type… Oil-type Control method… Energy-saving AUCS or automatic start/stop selection Power sup...

    Nara, Japan
  • no-image_en.png

    2001 Hitachi PBD-2.2EA/6

    • Manufacturer: 日立

    Screw-type air compressor Cooling method: air cooling Maximum pressure: 9.5 kgf/cm2 Discharge air flow: 265 L/min Power supply voltage: 200 V 60 Hz Operating time: 1648 hours With air dryer

    Nara, Japan
  • no-image_en.png

    2006 Nagaoka NZC-250E-600

    • Manufacturer: ナガオカ

    Left to right (front fixed) with worktable, work conveyor Supported board width… Max 250 mm Overall length of device… 600 mm Touch panel Dimensions… W600×D650×H1030 mm

    Nara, Japan
  • no-image_en.png

    2006 NAGAOKA NZC-250E-500

    • Manufacturer: ナガオカ

    Workbench with work conveyor Compatible board width…Max 250mm Institution overall length…700mm Touch panel Rail width.. automatic width adjustment Equipment dimensions…W700×D700×H1,220mm

    Nara, Japan
  • no-image_en.png

    2002 Seitec TOM-Ⅶ-350

    • Manufacturer: Seitec

    Left to right (fixed front) lead-free compatible * Solder bath pot.. cast iron (corrosion resistant) 　(surface treatment/pot thickness..12–15t) Entrance cover.. included Exit slide table * Maximum PCB size.. 350×...

    Nara, Japan
  • no-image_en.png

    2009 Komatsu ENG10MC

    • Manufacturer: Komatsu

    Right to left (front fixed) NG stocker Supports M boards Number of rack standby: 1 pce Take-out from front of rack Equipment dimensions: W1050 x D650 x H730mm Control No. NNG

    Nara, Japan
  • no-image_en.png

    2007 Komatsu EC45MC

    • Manufacturer: 小松

    Right to left (front fixed) substrate width (maximum width: 250mm) Total length: 450mm

    Nara, Japan
  • no-image_en.png

    2007 Komatsu EC45MC

    • Manufacturer: 小松

    Right to left (front fixed) board width (maximum width: 250mm) Total length: 450mm

    Nara, Japan
  • no-image_en.png

    2007 Komatsu EC45MC

    • Manufacturer: 小松

    Right to left (front fixed) substrate width (maximum width: 250mm) Total length: 450mm

    Nara, Japan
  • no-image_en.png

    2007 Komatsu EC45MC

    • Manufacturer: 小松

    Right to left (front fixed) substrate width (maximum width: 250mm) Total length: 450mm

    Nara, Japan
34567