Used Processing in Ontario, Canada

970 Litres fibreglass tank with manhole on top

-3 stationary legs -Dome bottom -Flat lid with manhole -215 imp

Clamp Down Bag Filter

-Shipping dimensions: length 42" x width 15" x height 13" -Inlet / outlet - 2.5"

Twister T4 Trimmer

• Manufacturer: Twister

-Dimensions: 25" length x 15" width x 16.5" height -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Twister T2 Trimmer

• Manufacturer: Twister

Sterling motor -1 Hp -115/208-230 V -1 Phase -60 Hz -15.4/7.5-7.7 amp

2,200 Litres plastic storage tank with SS containment

-4' dia x 7' high plastic tank -5' x 6 1/2' x 32" deep SS containment tank -C/w Prominent metering pump -LAST USE: ACID STORAGE/WATER TREATMENT -3 IN STOCK

thermal Transfer air Cooler for air compressor 2 of 2 partner is B1129

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Thermal Transfer air Cooler for air compressor

• Manufacturer: Thermal transfer products ltd.

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

GROEN Electric Tilt Kettle

• Manufacturer: Groen

CATEGORY: Kettles Model TDB-1-20 qt 50 psi @ 290 F 208 volt, 3 phase 6.3 kw CRN-B4009.5 5.5 Imperial gallons

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

350 Litres open top fiberglass tank

-4 stationary legs -Dome bottom -Open top -Fiberglass -Steel frame -78 imperial gallons