Used Transportation & Trailers in Ukraine

Special Balancing Machine9717K

• Horsepower: 15 hp

Wheel balancing machine model 9717K is designed for balancing of wheel pairs of railway trains weighing up to 1500 kg, including wheel pairs of passenger locomotives operating at speeds of 140 km/h. The machine i...

Special Balancing Machine9718K

• Horsepower: 15 hp

The balancing machine model 9718K is a special equipment whose task is to balance wheel pairs of railway trains with a weight of up to 3000 kg. The machine can be used for balancing wheel pairs of freight and pas...

Horizontal Balancing Machine9A713

• Horsepower: 1 hp
• Drive types: Mechanical (PTO/Chain/Belt)

Lightweight balancing machine 9A713 is used to balance rotors of various designs, the mass of which does not exceed 30 kg. The high sensitivity of the machine allows you to work with unbalances of very small magn...

Horizontal Balancing Machine9A714

• Horsepower: 2 hp
• Drive types: Mechanical (PTO/Chain/Belt)

Lightweight balancing machine 9A714 is used to balance rotors of various designs, the mass of which does not exceed 60 kg. The high sensitivity of the machine allows you to work with unbalances of very small magn...

Horizontal Balancing Machine9A712

• Horsepower: 1 hp
• Drive types: Mechanical (PTO/Chain/Belt)

Lightweight balancing machine 9A712 is used to balance rotors of various designs, the mass of which does not exceed 10 kg. The high sensitivity of the machine allows you to work with unbalances of very small magn...

Driveshaft Balancing MachineBVI-03-72

• Manufacturer: VTM GROUP
• Horsepower: 2 hp

The BVI-03-72 specializes in balancing two propshafts and is designed for use in railroad repair depots. However, it is also capable of handling other types of universal joint shafts up to 100 kg in weight and le...

Driveshaft U-joint PressP2515K

• Horsepower: 3 hp
• Drive types: Hydraulic

Hydraulic press P2515K is designed for driveshaft disassembly, it is also designed for quick and effective disassembly of the hinges and replacement of the trunnions in the joints of cardan shaft. Large set of t...

VSR Balancing MachineSBR-20

• Horsepower: 2 hp

The machine is designed for the high-speed balancing of turbochargers at speeds reaching maximum operational values to eliminate the dynamic unbalance of the turbine rotor. Used for balancing large turbochargers ...

Turbo Flow BenchTURBO-BOOST-TEST

• Horsepower: 6 hp

The bench is used to check the boost characteristics after a repair of a turbocharger with or without vacuum or electronic control. On the bench it is possible to adjust the geometry of the turbine in dynamic mod...

Driveshaft Balancing MachineBVI-03-90

• Manufacturer: VTM GROUP
• Horsepower: 3 hp

Driveshaft balancer BVI-03-90 has a high performance and is used to balance cardan/drive shafts of the cars and trucks up to 200kg. Also, it makes the process of balancing the driveshaft simple thanks to many tec...

Driveshaft U-joint PressCentering bracket

The cross journal jig is a fixture used with a press for quality assembly of “unassembled” cross shafts of passenger car and truck driveshafts after repairs. It was originally designed for repair shops specializi...

DPF Cleaning MachinesPOSEIDON-1000 Maxus

• Manufacturer: Saic
• Horsepower: 22 hp

The machine allows you to max out the performance of DPF filter and catalyst cleaning for all types of cars without mechanical intervention. The operating principle of the stand is based on the water hammer effec...

Driveshaft U-joint PressPRK-2

• Manufacturer: VTM GROUP
• Transmission type: Manual

A yoke with a trunnion is installed in such a way, so that the axis of the yoke hole (and the crosspiece) matches the axis of the puncheon. In like manner, a lower stop is installed to the trunnion support. To pe...

Renault PREMIUM Cab Chassis truck

• Manufacturer: Renault
• Model: PREMIUM

Good condition Renault PREMIUM Cab Chassis trucks available between 2000 and 2012 years. Located in Ireland and other countries. Click request price for more information.