2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany- Trusted Seller
Krause FNP
- Manufacturer: Krause
Antique Joint nipping machine Krause FNP Antique bending downward press - Antique Joint nipping machine Krause FNP Year built / Year ca. 1950 - Serial-No. 71635 Press area / Press area max. 250 x 500mm
Emskirchen, Germany 1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany- Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany 2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kW
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
This long-folding machine SuperLine-300-SO-CNC-6 from Jorns AG is a well-preserved, robust hydraulic swivel bending machine for precise and repeatable bending work in sheet metal processing. It is especially suit...
Hohenbrunn, Germany1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany- Trusted Seller
2019 WEMO 8-5 xDesign
- Manufacturer: WEMO
2019 WEMO 8-5 xDesign Type: 8-5 xDesign Year: 2019 Volts: 3X 400 VAC +N+PE 50Hz Amps: 16 Bar: 6 The 2019 WEMO 8-5 xDesign is a machine primarily used in the manufacturing industry, specifically for metal f...
Munich, Germany - Trusted Seller
Emskirchen, Germany 2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany- Trusted Seller
1970 Kolbus HL
- Manufacturer: Kolbus
Head & Tail Banding Machine Kolbus HL Head & Tail Banding Machine Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Performance / Speed up to 36 cycles/min. Consisting of / Consist of...
Emskirchen, Germany 
Akyapak AS 95-20/1.5 Bending & Forming
- Manufacturer: Akyapak
- Model: AS 95-20/1.5
Good condition Akyapak AS 95-20/1.5 Bending & Formings manufactured in 2025. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
