Used Construction in Baden-Württemberg, Germany

HARTFUSS

• Manufacturer: HARTFUSS

progressive auger, 1 cutting edge, 7 rock bits on spiral + pilot with 4 rock bits

Twister 4 threaded bolts

4 threaded bolts Casing-ø mm: 630/550 | Type of casing: unknown | For drilling rig: DELMAG RH 0912 / RH 10 (?) | Usable length m: 1,53

diesel pile hammer similar to DELMAG D12

• Manufacturer: Delmag
• Model: D12
• Max. pile weight: 0.8 t

Manufacturer unknown, but the design is similar to DELMAG D12. Complete with squared guides. Without tripping (copping) device. Optionally, a used tripping device type DELMAG...

Double wall casings 5 x 2 m // 1 x foot casing 2

5 x 2 m // 1 x foot casing 2,8 m // 1 x female coupling 0,45 m

NASSOVIA / EMDE (?)

• Manufacturer: NASSOVIA / EMDE (?)

4 x 1,04 m without connecting parts Outer-/ inner-ø mm: 524 / 482 | Coupling- system: keys + caps | Qty. m: 4,15

LEFFER

• Manufacturer: LEFFER

double-cutting, each with 3 flat teeth BETEK + pilot with 2rock bits

Acessories for drilling work Threaded casings

Threaded casings, defective, for use to manufacture of adapers, reducers and so on. In total ap. 37 pcs. with transport rack, in different dimensions, essentially consisting ...

ABF KR SR-W

• Manufacturer: ABF KR SR-W

Widia-pins (cutting ring worn-out) Ø mm: 720 | Length mm: 1550 | Kelly- box: 130

ABF Augers double-cutting

• Manufacturer: ABF

double-cutting, each 6 rock bits + pilot with 4 rock bits

ABF Augers double-cutting

• Manufacturer: ABF

double-cutting, each 8 pcs. rock bits + pilot with 4 rock bits

ABF KR SR-W

• Manufacturer: ABF KR SR-W

Widia-pins (cutting ring as good as new!) Ø mm: 1025 | Length mm: 1740 | Kelly- box: 130

ABF KR SR-W

• Manufacturer: ABF KR SR-W

Widia-pins (cutting ring worn-out) Ø mm: 720 | Length mm: 1540 | Kelly- box: 130

Fuel pump DELMAG D 16-32

• Manufacturer: Delmag
• Model: D16-32

seldom used (stand-by pump), overhauled by DELMAG in 2007, has not been working since that time! very good

rope for crane / excavator Ø 18 mm, length ap. 90 m

• Manufacturer: rope for crane / excavator Ø 18 mm, length ap. 90 m

with loose rope ends, without beckets, on reel probably unused

BAUER / LEFFER

• Manufacturer: BAUER / LEFFER

1 x tube 1,98 m without couplings! Outer-/ inner-ø mm: 880/800 | Coupling- system: screws and keys | Qty. m: 1,98