Used Foundry & Casting in Germany

2022 BMD AM (S) 135.90

• Manufacturer: BMD

Flask size: LxBxH: 1350 x 900 x 400 / 400 mm Mainly consists of: 1 Moulding machine 5 Cope & 5 Drag Flasks 1 set Filling frame (for each cope & drag) 1 set Pattern plate carrier (for each cope & drag) 1 Driven R...

1994 Lüber UCM300

• Manufacturer: Lüber

Complete automatic core sand preparation & distribution plant for charging to serveral core shooters Mainly consists of: Primary machine Mixer UCM 300kg mobil Sand dosing system Sand day silo Resin day silo with ...

2017 ABP LFR 30

• Manufacturer: ABP

Furnace body holding cap. 45 t gross / 30 t net Mainly consists of: Furnace body with inductor and tilting chair with hydr. cylinder Hydraulic unit with control desk Three-phase-oil-stepdown-transformer 1250 kVA,...

1994 ABP ITK 4000

• Manufacturer: ABP

Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994 DS oil transformer 1,600kVA/10kV...

No-Bake Shake out

The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibration mass (2 pieces)...

2007 WEBAC ZUFS 200x2750

• Manufacturer: Webac

Mainly consists of: Unpacking group Regeneration group A Regeneration group B knock-out grates (2 pcs.) Concrete Counter-vibrating mass (2 pcs.) Funnels (2 pcs.) Vibratory conveyor troughs (4 pieces) Upper belt m...

2000 LAEMPE core-producing center LLKFZ 10

• Manufacturer: Laempe / Röperwerk

casting volume 10 l, core box max. 700x 350/695 x 480 mm, vacuum clamping device, filling funnel, enclosure, PLC control with LAEMPE operator guidance, gassing device, sand mixer SM7 1.5, binder dosing, steel fra...

VOGEL & SCHEMMANN MISCHKA I GF/70 "A"

• Manufacturer: Vogel

Batch max. 50-75 kg, container Ø 530 x 400 mm, capacity max. 1 t/h, drive power 2.2 kW, connected load 380 V, 50 Hz, hand lever door lock, control with emergency stop push button, tilting lid with position limit ...

1986 STEFFENS DUO-MIX 1

• Manufacturer: STEFFENS

Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...

1978 VOGEL & SCHEMMANN KSM 6.10.02

• Manufacturer: Vogel

Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

1989 RÖPER / LAEMPE LKV H 5

• Manufacturer: Laempe / Röperwerk

Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...

1988 LAEMPE core shooting machine L-5

• Manufacturer: Laempe / Röperwerk

Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R

2013 SEGAB PROMIX 2x 200

• Manufacturer: Segab

Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...

RÖPER / LAEMPE LKV H 12

• Manufacturer: Laempe / Röperwerk

Single-station machine, shooting volume 12 L, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, filling funnel with external vibrator, electrical control with LAEMPE operat...

1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

• Manufacturer: Vogel

Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...