Used Machine Tools in Bavaria, Germany

1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kW
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
2011 Jorns TwinMatic-300-SO-1150-CNC8000 double folding machine
- Manufacturer: Jorns
Used Jorns TwinMatic-300-SO-1150-CNC8000 double press brake. The machine is a robust welded construction with 9 columns, 9 clamping cylinders, and 36 K38 coupling joints mounted on a base frame. The machine is ...
Hohenbrunn, Germany
2010 Thalmann TD 200-6.4 double press brake
- Manufacturer: Thalmann
- Stroke length: 200 mm
Used Thalmann double bending machine, 5 finger grippers, Safety device: light barrier, Machine is sold as is, without warranty or functional test.
Hohenbrunn, Germany
Auction
ROMI - M510 - 2002 - Cycle-controlled lathe
- Manufacturer: Romi
- Spindle bore: 63.5 mm
machine Cycle lathe data Dimensions Electrical details
Wassertrüdingen, Germany
Visit Auction Website
Trusted Seller
Auction
Bench lathe, gear-driven, 2000 rpm, 1.5 kW, 430 kg, OPTIMUM TH 3309
- Manufacturer: Optimum
Lot consisting of 1 used bench lathe in very good condition. Minimal signs of wear, well maintained. Features: Model: OPTIMUM TH 3309, Max. speed: 2000 rpm, Thread cutting capability, manual gear adjustment, Inte...
Gersthofen, Germany
Visit Auction Website
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
2019 press brake Adira PM 022040
- Manufacturer: Adira
- Power requirement: 15 kW
Like-new Adira press brake with CNC-controlled crowning, LazerSafe safety system, foot pedal, and standard tool set. The machine is in like-new condition, having only a few operating hours. It was never used bey...
Hohenbrunn, Germany
Auction
MIYANO - BNC-42C 5 - 2012 - CNC lathe
- Manufacturer: Miyano
- Model: BNC42
- Spindle bore: 42 mm
Bar passage: 42 mm | Maximum workpiece length: 150 mm (5.9 inches) | Maximum speed: 5,000 rpm | Spindle motor: 7.5 kW | Control: CNC Fanuc | Tool magazine: 8 positions | Bar feeder: FMB 542 Turbo - 3000 mm | Bar...
Huisheim, Germany
Visit Auction Website
Auction
MAZAK SUPER 250 MY Lathe Mazak Super Quick Turn250
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 250
- Spindle bore: 65 mm
Bar work up to a diameter of max. 65 mm (can be equipped with fixed and driven tools as required) Without
Huisheim, Germany
Visit Auction Website
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany
2013 double shearing machine Jorns TP150-RH-1150-CNC8000-6.4-hs
- Manufacturer: Jorns
Double-press brake machine, with the following equipment: - 4 pneumatic clamping fingers with short clamping fingers - long accessory rail - foot control - sheet metal cassettes - upper beam with bending groove -...
Hohenbrunn, Germany
2014 Long bending machine Jorns SL-300S-1250-RH-OV-DP-CP200
- Manufacturer: Jorns
Used Jorns swing-bending machine with the following features: • Reinforced version with additional stand unit • Deep draw with motorized depth stop system 1250mm, with 4 stop fingers • CNC touch graphics control ...
Hohenbrunn, Germany
1998 Jorns NL125-SM-CNC400A-6x1.25 long bending machine
- Manufacturer: Jorns
used hydraulic Jorns swivel-bending machine, with hydraulic roller shear SM 1.5 and depth stop (4 stop fingers), with emergency stop rail, rearwardable sheet supports and control on the swivel arm, machine was re...
Hohenbrunn, Germany