Used Machine Tools in Saxony, Germany

COVER Trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

RSF ELECTRONIC length measuring system

length measuring system RSF ELECTRONICS MSA6706 83577408 approx. 0.6 m connecting cable Spare part, etc. for Machining Center MAZAK AJV25 /405 ! Used!

COVER tensioning drive

• Manufacturer: Pagus

Clamping drive, electric with manual fine adjustment COVER 194 rpm i = 7 (electric) i = 1 (manual) Motor: AEG AD 71 NZ 4 0.37 kW 1360 rpm 220 / 380 V AC spare part for milling machine DECKEL KF12 ! used, tested !

SPITZNAS pneumatic impact wrench

• Manufacturer: SPITZNAS

Pneumatic impact wrenches, pneumatic wrenches SPITZNAS 1 inch with claw coupling used, checked, illustration may differ!

HEIDENHAIN length measuring system

length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1.5 m connection cable Spare part, etc. for Machining Center HECKERT CWK400 D! Used, checked !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

WMW tensioning drive

• Manufacturer: WMW

Clamping drive, clamping force generator electric WMW EDU I80 M TGL 0-5471 Torque adjustable in 8 steps from 20 to 120 Nm 80rpm 220/380V unused! Customers who bought this product also bought the following product...

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 (DH315x3) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm (left-hand thread) Bore: Ã 30 mm, depth: 55 mm used, tested!

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

HILMA NC 160

• Manufacturer: Hilma

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 65 kg | Space requirements of the machine approx.: m | Span ...

Ambos WMW

• Manufacturer: WMW

Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm