Used Machine Tools in Saxony, Germany

WMW Niles 250x4

• Manufacturer: Niles

4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and f...

Röhm KFD-F-EC 400/3 (Nr.35)

• Manufacturer: Röhm

Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken

WMW 600x3

• Manufacturer: WMW

3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key

PST 1,3

• Manufacturer: PST

3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 (DH315x3) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm (left-hand thread) Bore: Ã 30 mm, depth: 55 mm used, tested!

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

Emag VCL 630/800

• Manufacturer: Emag

VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 28 pieces IND-SPHINX® PRECISION LIMITED Type 546 54600005000550000 Ã0.50x5.50mm Other quantities on request! New!