Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany2012 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder MAK III swing bending machine, manual bending jaw adjustment, foot pedal, motorized backgauge. The machine has been professionally repaired, inspected, and cleaned and is fully functional. A test ...
Hohenbrunn, Germany1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany1998 round bending machine Coil-Tec SM
- Manufacturer: Coil-Tec
Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.
Hohenbrunn, Germany1993 Schröder MAK II swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder motor-driven bending machine, with motorized backgauge, manual bending jaw lowering, foot switch. A new control unit is currently being installed. The machine is being professionally repaired, tes...
Hohenbrunn, Germany2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany2004 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
The used Schröder swing bending machine is a compact and reliable solution for precise bending operations. Equipped with a motorized stop, ball table, and CNC control, it offers user-friendly operation and high r...
Hohenbrunn, Germany1995 Dräco K9 double standing seam machine
- Manufacturer: Dräco
Used Dräco K9 double standing seam machine for closing angle and double folds, includes 1 set of cutting rollers for fold removal, including folding rollers. The machine is currently converted to cutting operati...
Hohenbrunn, Germany- Trusted SellerAuction
2018 Schmid SE 349 2 Vertical Drilling Tapping Machine with Siemens 840D Control
- Manufacturer: Schmid
Note: Images are for reference only. The machine is a new 2018 model and remains unused in its original shipping crates in offsite storage. Photos shown are of the same model for illustration purposes only. With ...
Schweinfurt, GermanyVisit Auction Website - Trusted SellerAuction
2015 Hydraulic press brake, CNC-controlled, 3200 kN, TRUMPF TruBend 5320, Year
- Manufacturer: Trumpf
- Model: TruBend 5320
Lot consisting of 1 used hydraulic CNC press brake in very good condition. Machine is equipped with powerful hydraulic drive, touchscreen CNC control, and comes with a complete tooling package. Model: TRUMPF TruB...
Gersthofen, GermanyVisit Auction Website Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany- Auction
2007 GILDEMEISTER CTX 420 linear CNC lathe
- Manufacturer: Gildemeister
- Model: CTX 420
Processing hours 7034 h
Wassertrüdingen, GermanyVisit Auction Website - Trusted SellerAuction
Profiroll Bad Düben Urwa 120S Cold Ring Rolling Machine With Rotec VME Max Control
- Manufacturer: Rotec
Maximum Working Ø120mm. S/No. 0047 (1995).
Schweinfurt, GermanyVisit Auction Website 2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 mm
- Power requirement: 11 kW
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany
Tip: Enter manufacturer, model or keyword
