Used Machine Tools in Saxony, Germany

PAGUS bezel

• Manufacturer: Pagus

Bezel, bezel, steady rest, fixed PAGUS used, checked!

PAGUS lunette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 150 mm | Center height: 175 mm | Foot: 220 x 100 mm | Counter pressure plate: 170 x 60 mm | Dimensions: 480 x 120 x 440 mm

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 160 mm | Center height: 225 mm | Foot: 280 x 80 mm | Counter pressure plate: 220 x 65 mm | Dimensions: 550 x 100 x 550 mm

ROTER BERG drive unit

• Manufacturer: RED BERG

Drive unit with pressure collet chuck RED MOUNTAIN 940 400 22 315/630 rpm Pressure collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 (ZG0KPR71G4-2) 0.55 /0.7 kW 315/630 rpm 400 V 3AC Hole spacing: 260/200 m...

ORSTA pressure generator

• Manufacturer: Orsta

Hydraulic pressure generator, Hydraulic cylinder tester, mobile ORSTA TGL 30-7306 63 - 160 kp /cm² 380 V 3 AC 50 Hz Used!

ERNAULT-TOYODA coolant tank

• Manufacturer: Ernault Toyoda

Coolant tank with pump ERNAULT-TOYODA 250 liters (eg for Ernault-Toyoda HES52) pump 120 l /min 3.5 bar 1.1 kW 220 /380V Used!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMRB 71 G 4 F 0.75 kW 1380 RPM 220/380 V 3AC New, with documents!

PAGUS bezel

• Manufacturer: Pagus

Bezel, bezel, steady rest, fixed PAGUS used, checked!

AS TECH Bolt tensioning device

• Manufacturer: AS TECH

screw fixture AS TECH HWS Hand lever pump: HDP07001003 9158.22 hydraulic nut: HWS16111131 9158.22.04 158kN 700 bar approx. 2.0 m connection hose in a metal case Used!

RÖHM Lunette

• Manufacturer: Röhm

Lunette, bezel, self-centering bezel ROHM SLZP-52180 4-645-003-04

MMZ336

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

SPITZNAS pneumatic impact wrench

• Manufacturer: SPITZNAS

Pneumatic impact wrenches, pneumatic wrenches SPITZNAS 1 inch with claw coupling used, checked, illustration may differ!

OVERBECK shaft clamping cylinder

• Manufacturer: Overbeck

Shaft clamping cylinder OVERBECK MM0WL000028 New! Diameter: Ø 24 / 30 / 85 / 63 / 25 mm | Length: 73.5 / 65 / 14 / 26.5 / 82 mm | Total length: 261 mm | Dimensions: 261 x 85 x 85 mm