Used Machine Tools in Saxony, Germany

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 81,0 HSS used, tested ! Diameter: Ø 81.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 447 mm | A-measure: 275 mm | Span length: 245 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 58,0 HSS used, tested ! Diameter: Ø 58.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 420 mm | A-measure: 260 mm | Span length: 225 mm | Riello ups...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 81.0 HSS New ! Diameter: Ø 81.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 515 mm | A-measure: 290 mm | Span length: 282 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 95.0 HSS New ! Diameter: Ø 95.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 522 mm | A-measure: 295 mm | Span length: 268 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 61.0 HSS New ! Diameter: Ø 61.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 430 mm | A-measure: 270 mm | Span length: 240 mm | Dimensions ( packag...

HSS twist drill MK2 #24267

Diameter 16.5 mm with Morse taper MK2 WMW Werkö HSS twist drill with tool taper - Diameter 16.5 mm - Steam-treated - Profile ground - with Morse taper MK2 - Right-hand cutting - For all normal drilling work in st...

HSS twist drill MK2 #24268

Diameter 21.0 mm with Morse taper MK2 WMW Werkö HSS twist drill with tool taper - Diameter 21.0 mm - Steam-treated - Profile ground - with Morse taper MK2 - Right-hand cutting - For all normal drilling work in st...

hydraulic machine vice 200 mm #B15772

Jaw width approx. 200 mm height approx. 100 mm hydraulic machine vice used manufacturer unknown jaw height approx. 100 mm approx. 700 x 300 x 250 mm with small hydraulic unit approx. 350 x 500 x 500 mm and steel ...

AMEC spade drill holder

• Manufacturer: Amec

Spade drill bit holder, spade drill bit, drill bit, with straight shank, spiral fluted, 3 pieces AMEC, ALLIED MACHINE & ENGINEERING 1x 26010H-25FM Shank diameter: Ø 25 mm, shank length: 56 mm 1x 24025H-32FM Shank...

AMEC spade drill holder

• Manufacturer: Amec

Spade bit holder, spade bit, drill bit, with straight fluted cylindrical shank, 3 pieces AMEC, ALLIED MACHINE & ENGINEERING 1x 27000S-20FM Shank diameter: Ø 20 mm, shank length: 50 mm 1x 25030S-40FM Shank diamete...

2011 Mühlbauer SOL800T

• Manufacturer: Mühlbauer

Individual component from overall system Assembly/test line for contact hole punching, longitudinal cut, on 6 x 31 mm tape width, tape width 2x200 mm, 12x31 mm, tape length 3000 m, capacity 2x 10 MW, consisting ...

2013 Rexroth IndraDrive Fc

• Manufacturer: Bosch - Rexroth

frequency converter

KENNAMETAL KTIP drill body

• Manufacturer: Kennametal

KTIP drill bit base body, holder for drilling/countersinking KENNAMETAL KTIP160R5SCF20M 2405283 Shank diameter: Ø 20 mm, shank length: 50 mm ( Weldon shank ) New ! with documents !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 90,0 HSS used, tested ! Diameter: Ø 90.0 mm | Cutting angle: 118° | 481 heures: HSS | Morse taper: MK5 | Overall length: 482 mm | A-measure: 265 mm | Span length: 235 mm | Dimensions ( p...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 66,0 HSS used, tested ! Diameter: Ø 66.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 427 mm | A-measure: 268 mm | Span length: 235 mm | Dimensions...