Used Machining Centers in Germany

Tool holder from WZM - WZM 871-1 17039

• Manufacturer: WZM

Tool holder, extension -drawing at the pictures Wave recording both sides: Ø 71 mm | Transport dimensions: 1650/800/H450 mm | Mass: 58 | Dimensions: 288/288 / H420 mm | Internal storage: 3C10102

CNC tightening bolt 5 pieces by Garant - DIN 69872 Form A M16 21019

• Manufacturer: Garant

CNC tightening bolt, tool holder, tool holder, milling holder, milling tool

Quick-change tool holder from – mounting points 90 mm 21257

Quick change steel holder, steel holder head, quick change steel holder

Steel holder from – 36 – 39 x 18 x 75 22001

Steel holder, clamping plate with T-slot Holder: 36 - 39 x 18 x 75 mm | Dimensions: 145/135 / H170 mm | Mass: 4 | Internal storage: 3A10301

CNC tool holder from – Ø 50 22082

Turning tool holder, steel holder, turning tool, turning tool holder, tool holder

Power Clamps from DESTACO - 82L32-143C8H0 10195

• Manufacturer: DESTACO

pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps

Quick-change tool holder from – 72/90 mm holder 21132

Quick change steel holder, steel holder head, quick change steel holder

Clamping tool SP - step chucks 15 pieces 7930

• Manufacturer: SP

Step jaws, clamping devices, clamping jaws, deep clamping jaws, clamping pads, clamping tools

2021 Okuma MA-600HB Machining Center Okuma MA 400 HA OKUMA MA HORIZONTAL Okum...

• Manufacturer: Okuma
• Model: MA-600HB

Industrial oven 2x2x2m 650C PLC also: Okuma MA-600HB Machining Center Okuma MA 400 HA OKUMA MA HORIZONTAL WORKING CENTER 400 HA OKUMA MB 56 VB VERTICAL WORKING CENTER 2004 MACHINING CENTER ROTOPALETTE OKUMA ...

2021 Vertical CNC manufacturing center with workpiece changing device CHIRON FZ 15 W

• Manufacturer: Chiron
• Model: FZ15
• Power requirement: 25 kW

the documentation is attached as a PDF Operating hours: 16.807 | Connection_values: Neutral conductor loadable, protective earth with frequency 50 Hz, socket type VDE-SCHUKO, machine connection voltage 3x400 volt...

2021 Vertical CNC manufacturing center with workpiece changing device CHIRON FZ 15 W

• Manufacturer: Chiron
• Model: FZ15
• Power requirement: 25 kW

the documentation is attached as a PDF Operating hours: 9.159 | Connection_values: Neutral conductor loadable, protective earth with frequency 50 Hz, socket type VDE-SCHUKO, machine connection voltage 3x400 volts...

Hydraulic unit l / min 110 bar from AXA - VSC-0-M 19366

• Manufacturer: AXA
• Model: VSC 0

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic pump -Hydraulic tank

2020 CNC Dual-Spindle Horizontal 5-Axis Machining Center SW BAW08-22

Item Description: Lot consists of: (1) CNC Dual-Spindle Horizontal 5-Axis Machining Center Technical Details: CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Net...

2012 CNC 4-Axis Horizontal Machining Center Starrag Heckert HEC 500D

• Manufacturer: Starrag

Item Description: Lot consists of: (1) CNC 4-Axis Horizontal Machining Center Technical Details: Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-ax...

2011 CNC 4-Axis Horizontal Machining Center Starrag Heckert HEC 500D

• Manufacturer: Starrag

Item Description: Lot consists of: (1) CNC 4-Axis Horizontal Machining Center Technical Details: Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-ax...