Used Machining Centers in Hesse, Germany

2019 Klaaßen SDM15-5

• Manufacturer: Klaaßen

Manufacturer: Klaaßen Model: SDM15-5 Year of Manufacture: 2019 Type of Machine : Turning Machining Center - Turning Diameter: 1,500 mm - Center Distance: 4,500 mm Key Features: - 4-guideway bed machine - ...

Clamping plate

Addition Very well-preserved clamping plate - table of a long-spindle planer - Further information Surface clean and flat, sides machined lengthwise, other side with T-slot for M 16 slot nuts

2024 MAZAK INTEGREX i 100 HS

• Model: INTEGREX I-100

Control: Mazatrol Smooth AI 5-axis simultaneous machining | Max. turning diameter: 600 mm | Max. turning length: 850 mm | Traverse: X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30 to 210° | Main spindle...

2016 MAZAK INTEGREX i 300 ST

• Manufacturer: Mazak
• Model: INTEGREX I-300ST

Control: Mazatrol Smooth X 5-axis simultaneous machining | Max. turning diameter: 658 mm | Max. turning length: 1.519 mm | Traverse: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to ...

2017 MAZAK INTEGREX i-300ST

• Manufacturer: Mazak
• Model: INTEGREX I-300ST

Control: Mazatrol Smooth X 5-axis simultaneous machining | Max. turning diameter: 658 mm | Max. turning length: 1.519 mm | Traverse: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to ...

RÖHM UH 3

• Manufacturer: Röhm

Additional Barely used and very well-preserved machine vise on a rotating plate Accessories Smooth clamping jaws

HILMA (wahrscheinlich) PWO-001896

• Manufacturer: Hilma

Add-on Used hydraulic machine vice on a rotating plate Accessories Smooth clamping jaws

HILMA (wahrscheinlich) SM 160

• Manufacturer: Hilma

Add-on Used hydraulic machine vice, on a rotating plate Accessories Pull-down clamping jaws No. 372204

1979 ALLMATIC 125

• Manufacturer: ALLMATIC

Add-on Little-used and very well-preserved mechanical high-pressure machine vice, pneumatically operated (instead of a hand crank) Accessories Built-in rotating plate, two longitudinal support surfaces for securi...

2016 MAZAK INTEGREX i-300

• Manufacturer: Mazak
• Model: INTEGREX I-300

Machine model: Mazak Integrex i 300 x 1000 | Control: Smooth X 5-axis simultaneous machining | Max. turning diameter: 658mm | Max. turning length: 1.011 mm | Traverse: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,077...

2017 MAZAK INTEGREX i-200S

• Model: INTEGREX I-200 S

Control: Mazatrol Smooth X 5-axis simultaneous machining | Max. turning diameter: 658 mm | Max. turning length: 1.011 mm | Traverse: X-axis: 615 mm Y-axis: 260 mm Z-axis: 1,077 mm B-axis: -30 to 210° | Rapid tra...

T-slot plate

Addition Used T-slot plate with flange ribbing on the base Further information Surface clean and flat, T-slots without breakouts, 4 flange pockets, 3 mounting holes, 2 alignment holes.

2009 Biesse C6.50 WMS

• Manufacturer: Biesse

Manufacturer: Biesse Model: C6.50 WMS Year of Manufacture: 2009 Type of Machine: Machining center with automatic loading Working Field: - X-axis: 6400 mm - Y-axis: 1650 mm - Z-axis: 350 mm Drilling Head: ...

2005 SCHÜCO PBS

• Manufacturer: Schüco
• Model: PBS

Manufacturer: SCHÜCO Model: PBS Type of Machine :Profile Processing System Technical Data - Travel Range: - X-Axis: 6850 mm - Y-Axis: 800 mm - Z-Axis: 500 mm - Rotation: - B-Axis: 0 to 90° continuously adjust...

Foundation or clamping plates, approx. 50 pieces in stock

Additional information Approx. 50 used gray cast iron foundation or clamping plates, ribbed, with the design and T-slot layout as shown. Further information Surface clean and flat, sides machined all around (for ...