Used Material Handling in Bremen, Germany

Trusted Seller
Stainless steel container 10 cbm
- Manufacturer: Sielmann
Design: Cylindrical, horizontal on 6 feet, height-adjustable, with curved bases. Insulated around the cylinder and bases. Fully welded stainless steel cover. Connections: 1 manhole Ø 450 mm in the front, with an ...
Bremen, Germany
Trusted Seller
Stainless steel container 117 cbm
- Manufacturer: Sielmann
Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...
Bremen, Germany
Trusted Seller
Stainless steel container 150 cbm
- Manufacturer: Sielmann
Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...
Bremen, Germany
Trusted Seller
Stainless steel container 0.95 cbm
- Manufacturer: Sielmann
Content: 0,95 cbm | Material: stainless steel | Material specification: VA 1.4404 | Diameter: 950 mm | Cyl. height: 1080 mm | Per floor: 200 mm | Ground clearance: 900 mm | Total height: 2380 mm | Piece: 1 | Sto...
Bremen, Germany
Trusted Seller
Stainless steel container 5.9 cbm
- Manufacturer: Sielmann
Design: cylindrical standing on 3 feet made of Fe with curved bases. Connections: 1 dome DN 500 in the upper base side as well as 1 x DN 200 in the middle, 1 x DN 150 in the cylinder, 1 x DN 100 and 2 x DN 250. O...
Bremen, Germany
Trusted Seller
Stainless steel container 3.85 cbm, insulated
- Manufacturer: Sielmann
Operating data: -0.07/+0.4 bar operating pressure +20/+90 °C operating temperature according to nameplate Design: cylindrical hanging on 3 claws with curved bases Insulation around cylinder and lower base, stainl...
Bremen, Germany
Trusted Seller
Stainless steel container 2.4 cbm, insulated
- Manufacturer: Sielmann
Design: cylindrical, standing on 3 feet, with conical bases, insulation around the cylinder and lower base, fully welded stainless steel cover. Connections: 1 hinged lid dome DN 450 in the upper base, centered ve...
Bremen, Germany
Trusted Seller
Stainless steel container 0.26 cbm
- Manufacturer: Sielmann
Design: cylindrical standing on 3 feet, open at the top, with a curved bottom and a baffle inside. Connections: spray ring line at the top, 1" spout, projecting next to it 1x 1" with bend.
Bremen, Germany
Trusted Seller
Stainless steel container 25.6 cbm
- Manufacturer: Sielmann
Operating data: Operating pressure 0.5 bar, as per nameplate Design: Cylinder standing on three feet, height-adjustable, with conical bottoms. Heating via pillow plates on the cylinder and one circuit on the lowe...
Bremen, Germany
Trusted Seller
Transport container 3 cbm
- Manufacturer: Sielmann
Wall thickness: 3 mm on all sides Design: Rectangular with a reinforced flat top and conical bottom with forklift pockets and internal struts Connections: 1 x manhole 340 x 440 on the side, 1 x Ø 250 opening in t...
Bremen, Germany
Trusted Seller
Stainless steel container 5.5 cbm, insulated
- Manufacturer: Sielmann
Design: cylindrical, suspended on 4 claws with conical bases. Insulation around the cylinder, fully welded stainless steel cover. Connections: 1 manhole DN 500 in the upper base. 1 spray head in the center, 1 x D...
Bremen, Germany
Trusted Seller
Stainless steel container 2.6 cbm, insulated
- Manufacturer: Sielmann
Design: cylindrical, standing on three feet, flat lid on top, hinged on both sides, with conical bottom base, insulation around the cylinder, fully welded stainless steel cover Connections: 1 x DN 65 in the lid, ...
Bremen, Germany
Trusted Seller
Stainless steel container 2.2 cbm, insulated
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, height-adjustable, with bracing, with a flat upper cover, divided into two parts and hinged, and a lower conical base with a spout cup. Insulation around the cylinder, low...
Bremen, Germany
Trusted Seller
Stainless steel container 2.1 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on three FE feet with a domed upper end and a conical lower end, with 50 mm wide insulating rings. Connections: 1 DN 500 dome in the upper end, 4 x DN 251 x DN 50 and a DN 150 block ...
Bremen, Germany
Trusted Seller
Stainless steel container 28.5 cbm
- Manufacturer: Sielmann
Design: cylindrical, horizontal in a galvanized steel frame, on bearing saddles, height-adjustable, with curved bottoms. Connections: 1 manhole 340 x 440 mm in the front end, 1 x DN 101 x DN 50 on the upper apex ...
Bremen, Germany