Used Processing in Germany

Waffle cone oven for waffle cones - 20759
- Manufacturer: G.A.M. / Steinhoff GmbH / HAAS
output: approx. 4,500 pcs/h cone lengths: 115, 125, and 135 mm connection: 380 V 3 units available price is per unit ex works
Willich, Germany
roasting plant - 20539
- Manufacturer: Brovind - GBV Impianti srl
made in 2016 BUT was only 20 shifts in production that is why the line is still like new made capacity 2 batches each 50 kg hazelnuts / 100 kg/h with frame with cyclon complete undismantled ex Europe
Willich, Germany
Ed. Haas Austria GmbH SWAE 30, AWSTB
- Manufacturer: Haas
wafer line consisting of: 2 pcs. wafer ovens HAAS type SWAE 30 electrically heated fine square, 30 wafer plates each oven 1 pcs. wafer sheet cooler 1 pcs. HAAS wafer creaming machine type AWSTB 1 wafer cut...
Willich, Germany
wafer line - 29847
- Manufacturer: Gemni International
consisting of: Oven Waffle sheet cooler Cream spreading machine with 36 baking plates, size 290 x 470 mm Gas heated with propane gas. It was originally heated with natural gas. 380 / 420 V, 50 Hz Waffle sheet thi...
Willich, Germany
2017 Hoffmann S-V7
- Manufacturer: Hoffmann
Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse ...
Cloppenburg, Germany
NN Hammermühle
- Manufacturer: NN
for shredding of soft to medium-hard material such as grains, cereals, biomass, wood chips or feed. How it works: 4 rotating hammers strike the material to be shredded against a sieve
Willich, Germany
Herbort - Spare parts for cutting machines, type 122, 120 N, etc
- Manufacturer: Herbort
for cutting machine 122 N: Circular knife shaft complete with 91 knives - 2.8 mm cut, Flat knife - holder without knife for 2.8 mm cut, Round knife - shaft with nut, without knife, Mincer shaft pitch 28 for 1...
Willich, Germany
1983 AXMANN TURBO-Mixer TM 12
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 12 t/h, radius 2.5 m, double mixing arm (premixer) 2x 1.5 kW, turbo mixer 4 kW, additive metering pumps (1998), control system
Meinerzhagen, Germany
eCO TOP AIR HANDLING UNIT
- Manufacturer: TopAir
Top connected ductsRotary or Counterflow Plate heat exchangerLow noise level <35 dB within 3 meters
Herne, Germany
Trusted Seller
Air Handling Unit HVAC - Howatherm - BT.222.GE
- Manufacturer: BT
Ventilator Brand : Gebhardt Model : 2x G-ETA 450 Airflow Volume : 11500 m³/h Total Static Pressure : 1090 Pa Dynamic Pressure : 37 Pa Shaft Power : 2 x 2.32 kW Speed : 2210 1/min (Max. 2406 1/min) Frequen...
Mainz, Germany
Auction
MARK - RMF 111 IVR - Screw compressor - 2022
- Manufacturer: RMF
Fully functional, including any tools, spare parts and accessories as well as documentation
Solingen, Germany
Visit Auction Website
eCO SIDE AIR HANDLING UNIT
Side connected ducts, pipes and cables for easy installationRotary or Counterflow Plate heat exchangerLow noise level <35dB within 3 meters
Herne, Germany
Trusted Seller
Alpine Hammermühle 40 / 20
- Manufacturer: Alpine
Drive: 11 kW | Engine: 11 kW
Mannheim, Germany
Trusted Seller
MINOX Siebtechnik GmbH MTS 1200 / 4
- Manufacturer: Minox
4 deck machine, Diameter per sieve: 1200 mm; Drive: 4 KW; --> Machine inspected at delivery and ready to run, top condition!
Mannheim, Germany
Trusted Seller
Alpine Rotoplex 50 / 80 Ro
- Manufacturer: Alpine
cutting mill Angular speed: 552 1/min. Cross section machine opening: 840 x 520 mm Rotor diameter: 500 mm Rotor length: 840 mm dynamic load: approx. 3100 kg Rotor stopping time: 55 seconds.
Mannheim, Germany
Atlas-Copco GA 18+ Industrial Compressor
- Manufacturer: Atlas-Copco
- Model: GA 18+
Good condition Atlas-Copco GA 18+ Industrial Compressors manufactured in 2006. Located in Belgium and other countries. Click request price for more information.
Belgium