Building Filters
- Trusted Seller

TOS TRENCIN SN40C MANUAL ENGINE LATHE
- Manufacturer: TOS
- Model: SN 40
- Spindle bore: 52 mm
TOS TRENCIN SN40C MANUAL ENGINE LATHE Manufacturer: TOS Model: SN40C POWER: 575v, 60hz, 3ph Machine type: Manual engine lathe (gap-bed) Swing over bed: 16'' (400 mm) Swing over cross slide: 8-3/4'' (220 mm)...
Toronto, Canada - Trusted Seller

Used Texwrap Heat Tunnel, Model T-822
- Manufacturer: Texwrap
- Model: T-822
1 Used Texwrap Heat Tunnel, Model T-822. Tunnel opening: 22” x 8” H. Comes with a stainless steel mesh belt at 14” wide. Integrated controls for conveyor speed, heat on/off with digital heat controller. Machine s...
Toronto, Canada - Trusted Seller

2004 VIKING CORPORATION 300J
- Manufacturer: Viking
- Model: 300
STEEL SHOT BLAST MACHINE BELT TYPE MACHINE MANUALS AVAILABLE INCLUDING DUST COLLECTOR
- Trusted Seller

2021 BYSTRONIC BYSMART 3015 5' X 10' 6KW FIBER LASER CUTTING SYSTEM
- Manufacturer: Bystronic
- Model: BySmart 3015
2021 BYSTRONIC BYSMART 3015 5' X 10' 6KW FIBER LASER CUTTING SYSTEM Manufacturer: Bystronic Model: Bysmart Fiber 3015 Mfg Date: 2021 POWER: 480v,60hz, 3ph HOURS: Cutting Hours: 2,809 hrs Running Hours: 6,79...
Toronto, Canada - Trusted Seller

Empire Abrasive Blast Finishing System
- Manufacturer: Empire
Industrial blast finishing equipment manufactured by Empire Abrasive Equipment Company. This used system includes a pressure blast vessel with integrated dust collection/filtration, blower, control enclosure, and...
Toronto, Canada - Trusted Seller

2013 Komatsu HM400-3
- Manufacturer: Komatsu
- Model: HM400-3
- Horsepower: 451 hp
- Hours: 22,995 h
Please call with any questions, (410) 216-3949, Se Habla Español.
- Trusted Seller

2007 DURMA E37160 160 TON X 12' PRESS BRAKE
- Manufacturer: Durma - Durmazlar
- Capacity: 160,000 kg
- Stroke length: 200 mm
2007 DURMA E37160 160 TON X 12' PRESS BRAKE Manufacturer: Durmazlar Model: 7534072830-E Mfg Date: 2007 POWER: 575v, 60hz, 3ph Capacity: 160 Ton Bending Length: 3700 mm Table / Bed Height: 859 mm Hydraulic...
Toronto, Canada - Trusted SellerAuction

Display counter top with bottom cabinets
As Is, Where Is Assets are sold AS IS WHERE IS. Bidders are invited to bid with the information provided. Condition when removed from service - Working Last known condition - Working Reason for being auctioned -...
Toronto, CanadaVisit Auction Website - Trusted Seller

2005 FUJI FS4 CNC LATHE
- Manufacturer: Fuji
- Model: FS4
2005 FUJI FS4 CNC LATHE Manufacturer: Fuji Model: FS4 Mfg Date: 2005 POWER: 200v, 60hz, 3ph Loader: Gantry (robotic loader + infeed/outfeed conveyors + chip chute) Chuck size(3 jaw): 6" (165 mm) Capacity &...
Toronto, Canada - Trusted Seller

2019 MVD C400 14' X 400 TON PRESS BRAKE
- Manufacturer: MVD
- Stroke length: 305 mm
- Daylight: 533 mm
2019 MVD C400 14' X 400 TON PRESS BRAKE Manufacturer: MVD Model: C400-4300 Mfg date: 2019 POWER: 575v, 60hz, 3ph Hours Machine on: 669d 14h 21min Pump on: 508d 18h Bend Cycles: 332,183 GENERAL Press For...
Toronto, Canada - Trusted Seller

2013 Biesse Akron 440 Automatic Edgebander
- Manufacturer: Biesse
- Model: Akron
Automatic egdebander with pre-milling and corner rounding. Disconnected from power but viewable. Comes with manuals. 3' W x 17' L
Toronto, Canada - Trusted Seller

SCM SI16 WA Sliding Table Saw
- Manufacturer: SCM / SCMI
- Model: SI16
Standard wood working sliding table saw. Disconnected from power but viewable. Comes with manuals. 10' W x 12' L
Toronto, Canada - Trusted Seller

2000 SCM Sigma 90D Beam Saw
- Manufacturer: SCM / SCMI
- Model: Sigma
Large capacity panel saw. Disconnected from power but can de viewed. Comes with manuals. 20' W x 22' L
Toronto, Canada - Trusted Seller

2001 SCM Routech Record 220 CNC machine center
- Manufacturer: SCM / SCMI
- Model: Record
See attached PDF for further details (machine may not be exact). CNC Router machine for wood working. Disconnected from power but can be viewed. Comes with manuals. 8' W x 16" L
Toronto, Canada - Trusted Seller

2003 WERNER & PFLEIDERER ECOTHERM AUTOMATIC TUNNEL OVEN
- Manufacturer: WP
- Model: NUN Plus
2003 WERNER & PFLEIDERER ECOTHERM AUTOMATIC TUNNEL OVEN Manufacturer: Werner & Pfleiderer Model: NUN-PLUS 3300/18 Mfg Date: 2003 POWER: 575v, 60hz, 3ph Type & Configuration Type of Oven: NUN-PLUS 3300 Oper...
Toronto, Canada 
Lund Tyee GL Power Boat
- Manufacturer: Lund
- Model: Tyee GL
Good condition Lund Tyee GL Power Boats manufactured in 2025. Located in USA and other countries. Click request price for more information.
USA
