2007 Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake)
used
- Manufacturer: Küttner
Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake) Mainly consists of: 2 pcs. Shake-out, dim. 3500 x 6500 mm; max. weights of 45 t = combined a large shake-out, dim.7000 x 6500 ...
Iserlohn, Germany
Roeperwerk H80
used
- Manufacturer: Laempe / Röperwerk
Core shooting machine for cold-box process 80 L Max. core box dimensions: LxBxH 1000x720x800 mm (Horizontal); modern controls with Siemens S7, with Lüber gasing device Mainly consists of: Core shooter H80 Roller ...
Iserlohn, Germany
ASEA / ABB LRI 5
used
- Manufacturer: Asea
ASEA / ABB Inductor refurbished 500 kW inductor Technical data: – frequency: 50 Hz – rated voltage: 530 V – rated current: 1720 A – nominal temperature: 1500°C
Iserlohn, Germany
1994 ABP ITK 4000
used
- Manufacturer: ABP
MF crucible furnace system 2 t Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994 D...
Iserlohn, Germany
1990 DISA 2070 A
used
- Manufacturer: DISA
Disamatic vertical flaskles Moulding Line 2070 A Mould thickness 200 – 650 mm Mainly consists of: Moulding Machine (DMM – 5,9 Mil. original moulds produced only until now) SSU PMC 14 m SBC 12 m Cyclone Electric...
Iserlohn, Germany
No-Bake Shake out
used
No-Bake Shake out The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibrati...
Iserlohn, Germany
2007 WEBAC ZUFS 200x2750
used
- Manufacturer: Webac
Molding sand recovery system 60 t/h Mainly consists of: Unpacking group Regeneration group A Regeneration group B knock-out grates (2 pcs.) Concrete Counter-vibrating mass (2 pcs.) Funnels (2 pcs.) Vibratory conv...
Iserlohn, GermanyVOGEL & SCHEMMANN MISCHKA II
used
- Manufacturer: Vogel
Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...
Meinerzhagen, Germany
Sand dosing container
used
Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...
Meinerzhagen, Germany
2014 KLEIN Balgdosiergerät BDG 504 (EFV)
used
- Manufacturer: Klein
Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)
Meinerzhagen, Germany
Meinerzhagen, Germany
1993 GTG - Gießereitechnik GÖTZ BDE 2-770/960-A-G
used
- Manufacturer: GTG - Gießereitechnik GÖTZ
Two-component binder system, metering pumps 770/960 cm³
Meinerzhagen, Germany
2017 SEGAB ColdBox-Flüssigkeitsdosiergerät FD
used
- Manufacturer: Segab
Two-component binder system, dosing pumps 2.23 l/min, 0.37 kW, switch cabinet, PLC control, dosing valves
Meinerzhagen, Germany
1982 GISAG Flügelmischer AMF 160
used
- Manufacturer: Gisag
Mixing container, Ø 960 x 500 mm, usable capacity max. 160 dm³, discharge height approx. 675 mm, mixing blades, batch max. 200 kg, capacity approx. 3-4 t/h, pneumatic discharge gate, drive power 7.5 kW, connected...
Meinerzhagen, Germany
1993 LUEBER LW-FDA 825
used
- Manufacturer: Lüber
- Model: LW-FDA 825
Mains/control voltage 380/220 V, 50 Hz, heat output 8 kW, cold box process
Meinerzhagen, Germany
Tip: Enter manufacturer, model or keyword
