- Trusted Seller
4800 liter heat-/coolable pressure tank, Aisi 316 with jet stream mixer
used
- Manufacturer: Waldner
max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): double jacket temperature control bo...
- Trusted Seller
412 liter heat-/coolable tank, Aisi 316
used
- Manufacturer: Gresser
max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 100 °C Temperature control cylinder (dj): half-coil material temperatur contro...
- Trusted Seller
4000 liter insulated agitator tank, Aisi 304 with anchor agitator
used
remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...
- Trusted Seller
1050 liter pressure tank, Aisi 304
used
remarks: Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged)
$2,827 USDBremen, Germany - Trusted Seller
1027 liter pressure tank, Aisi 304
used
remarks: Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank
$3,298 USDBremen, Germany - Trusted Seller
10000 Liter tank for specific weights up to 1.4 KG/L, Aisi 316
used
- Manufacturer: A&B Apparate- & Behältertechnik Heldrungen GmbH
max. allowable working temperature: 80 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Type plate no longer available; further technical documents available; Di...
- Trusted Seller
4000 liter insulated agitator tank, Aisi 304 with anchor agitator
used
max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...
- Trusted Seller
1027 liter horizontal pressure tank, Aisi 304
used
remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...
$3,298 USDBremen, Germany - Trusted Seller
12220 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates
used
remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom material temperatur control system: AISI 304 (V2A) 1.4301
- Trusted Seller
10468 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates
used
remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and ar...
- Trusted Seller
6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates
used
remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301
- Trusted Seller
1000 liter cone container, Aisi 304
used
remarks: Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside
$1,414 USDBremen, Germany - Trusted Seller
500 liter pressure tank, Aisi 304
used
remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)
$2,945 USDBremen, Germany - Trusted Seller
Plate heat exchanger, stainless steel
used
- Manufacturer: APV Rosista GmbH
Other: - Manufacturer: APV- Type: DELTA SR52- Permissible operating pressure of the frame: 13 bar
$3,298 USDBremen, Germany - Trusted Seller
25000 liter heat-/coolable tank, Aisi 304
used
- Manufacturer: ALFA-LAVAL
Temperature control cylinder (dj): double jacket notice: some residues of previous content, pipe end cut flush remarks: Double jacket around approx. 1.800 mm of the cylinder height; Manhole approx. 410 x 510 mm; ...
Tip: Enter manufacturer, model or keyword