Used Processing in Ohio, USA

Mazzoni Billet Log Cutter, Type TVA/A

• Manufacturer: Mazzoni

Mazzoni Billet Log Cutter, Type TVA/A Used Mazzoni billet log cutter, type TVA/A, approximately 4.5" centers, set up for 9" center logs, serial# 1257, built 1986.

Mazzoni Billet Log Cutter, Type TVA/A

• Manufacturer: Mazzoni

Mazzoni Billet Log Cutter, Type TVA/A Used Mazzoni billet log cutter, type TVA/A, approximately 4.5" centers, set up for 9" center logs, serial# 0929, built 1975.

2" Sturtevant Micronizer Jet Mill, S/S

• Manufacturer: Sturtevant

2" Sturtevant Micronizer Jet Mill, S/S Used 2" Sturtevant Micronizer jet mill, 316 stainless steel construction, on base with vibrating feeder, serial# 1900231.

Premier HM15II Dual Chamber Media Mill

• Manufacturer: Premier

Premier HM15II Dual Chamber Media Mill Used Premier dual chamber medial mill, model HM15II, with dual 15 liter jacketed chambers, mechanical seals with seal pots, 460 volt, xp rated, serial# HM15II.20.1.PDK.4.86....

Netzsch Horizonal Media Mill, Model ME2 DCMS

• Manufacturer: Netzsch

Netzsch Horizonal Media Mill, Model ME2 DCMS Netzsch horizonal media mill, model ME2 DCMS, stainless steel construction, 2.7 liters, s/n 205-238, 7.5 hp, 460 volt, 3 phase motor, with controls on portable cart, w...

PVA Meter-Mix Dispensing System, Model Endurance

• Manufacturer: PVA

PVA Meter-Mix Dispensing System, Model Endurance Used PVA Meter-Mix dispensing system, model Endurance, setup with Part A and Part B piston pumps with menu-driven HMI to control shot size, mix ratio, flow rate, p...

Dings Overbelt Magnet

30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.

Honeywell C7076A1007 Ultraviolet Flame Detector

• Manufacturer: Honeywell

“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933

Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in

• Manufacturer: KOMAX

“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743

Yoshikawa CF-200TSR-DV Circle Feeder 200v-ac

• Manufacturer: Yoshikawa

“DIFFERENT CONFIGURATION” Model number: CF-200TSR-DV | Mpn: CF-200TSR-DV | Shipping weight: 144 lbs | Shipping dimensions: 41 x 22 x 19 in | Additional notes: DIFFERENT CONFIGURATION | Reference sku: 910577

Quadro Comil, Model U20,

• Manufacturer: Quadro

Quadro Comil, Model U20, Used Quadro Comil, model U20, stainless steel construction, driven by hp xp motor, on stainless steel adjustable height stand, machine serial# U20-0433, built 2004. �Requires impeller at ...

Galloup CIP Skid

• Manufacturer: Galloup

Galloup CIP Skid Used Galloup CIP skid, stainless steel construction, with 200 gallon stainless steel make up tank, SPX CIP cycle pump with 5 hp motor, SPX return waste pump with 7.5 hp motor, serial# N11162, bui...

Jetpharma Jet Mill, Model MC Jetmill 50

• Manufacturer: JetPharma

Jetpharma Jet Mill, Model MC Jetmill 50 Used Jetpharma jet mill, model MC Jetmill 50, stainless steel construction, with Ktron material feeder, type K-PH-MV-KT20, not complete , Jetpharma code# 24900C0516, built ...

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200#

• Manufacturer: Peterson

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200# Used BE Peterson distillation column reboiler unit, 316 stainless steel construction with 4" diameter x 60" high column section rated 200 psi ...

Aveka CCE Tech Air Classifier, Model 250

Aveka CCE Tech Air Classifier, Model 250 Used Aveka CCE Tech air classifier, model 250, cut size 1-50 micron, sharpness (D25/D75) .6-.8, feed rate up to 225 kg/hour, up to 250 scfm air flow, 12 in HG, 3 hp rotor ...