Building Filters
HOT STAMPING MACHINE | KENSOL | K25
- Manufacturer: Kensol
IMPORTANT INFORMATION: Shipping: Shipping is the responsibility of the customer. In addition, the cost of the import request must be covered. Support: We offer full support for the shipping process, including gui...
Tijuana, Mexico
Kensol K-65
- Manufacturer: Kensol
None Voltage: 220 VAC Single Phase | Clamp pressure: 8 ton TON | Heater head size: 10" X 15" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-65
- Manufacturer: Kensol
Stand Voltage: 220 VAC Single Phase | Clamp pressure: 8 Ton TON | Heater head size: 10" X 15" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-60
- Manufacturer: Kensol
None Voltage: 120 VAC Single Phase | Clamp pressure: 4 Ton TON | Heater head size: 6" X 8" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Santa Ana, CA
Kensol K-157
- Manufacturer: Kensol
None Voltage: 220 VAC Single Phase | Clamp pressure: 7 Ton TON | Heater head size: 12" X 18" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-156
- Manufacturer: Kensol
18x18 wrk tbl, drilled/tapped, very clean Voltage: 220 VAC Single Phase | Clamp pressure: 6 Ton TON | Heater head size: 10" X 15" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-65
- Manufacturer: Kensol
Brooklyn Novelty, Pinch Point Voltage: 120 VAC | Clamp pressure: 8 Ton TON | Heater head size: 9" X 12" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-60
- Manufacturer: Kensol
None Voltage: 120 VAC | Clamp pressure: 4 Ton TON | Heater head size: 6" X 8" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-65
- Manufacturer: Kensol
Dual Foil Feed, Factory Stand Voltage: 220 VAC Single Phase | Clamp pressure: 8 TON | Heater head size: 12" X 18" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-46
- Manufacturer: Kensol
Tooling for license plate frames Voltage: 220 VAC Single Phase | Clamp pressure: 6 Ton TON | Heater head size: 9" X 12" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-56
- Manufacturer: Kensol
None Voltage: 120 VAC | Clamp pressure: 6 Ton TON | Heater head size: 6" X 12" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-46
- Manufacturer: Kensol
Brooklyn Novelty, Older K46 Frame Voltage: 120 VAC | Clamp pressure: 5 ton TON | Heater head size: 9" X 12" Kensol | Foil feed type: Pnuematic | Foil feed direction: Right to Left
Santa Ana, CA
Kensol K-65
- Manufacturer: Kensol
None Voltage: 220 VAC Single Phase | Clamp pressure: 8 Ton TON | Heater head size: 12" X 24" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA
Kensol K-46
- Manufacturer: Kensol
Machine Stand Voltage: 220 VAC Single Phase | Clamp pressure: 5 ton TON | Heater head size: 9" X 12" Kensol | Foil feed type: Pnuematic | Foil feed direction: Left to Right
Santa Ana, CA