Used Dehumidifiers

ZEKS 125HSGA100

• Manufacturer: Zeks
• Model: 125HSGA100

Used Zeks air compressor air dryer Model #125HSGA100, Serial #297412-2. Uses 2 lbs. refrigerant R404.

47 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

• Manufacturer: AEC

Model: RDC-P-75 | Hopper capacity (l):: 125 | Dew point:: <-40 °C | Drying temperature:: Max. 80 - 160 °C | Air flow rate (cfm):: 47.1 | Voltage:: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 47

23 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

• Manufacturer: AEC

Model: RDC-P-25 | Hopper capacity (l):: 44 | Dew point °c:: <-40 | Drying temperature °c:: Max. 80 - 160 | Air flow rate (cfm):: 23 | Voltage:: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 23

47 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

• Manufacturer: AEC

Model: RDC-P-75 | Hopper capacity (l): 125 | Dew point °c: <-40 | Drying temperature °c: Max. 80 - 160 | Air flow rate (cfm): 47.1 | Voltage: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 47

Munters- Cargocaire Model HCD-600-EA Dehumidifier

• Manufacturer: Munters

Munters Cargocaire Model HCD-600-EA Dehumidifier CFM- 600 Serial number- 2083 Electrical requirements- 460/3/60 Condition- Good 2 available: Both were running with a Husky LX300 Injection Molding Machine used for...

Phoenix 200 MAX Commercial

• Manufacturer: Phoenix

“You get the unit in the pictures. Powers on and works.” This is a discription from the manufactureres website. Description Power: 7.4 amps Water Removal AHAM (80°/60% Rh): 133 pints Saturation: 240 pints Blower:...

Hisense Dehumidifier

Hisense Dehumidifier

Hankison Hhe-115 #17332

• Manufacturer: SPX Hankison

Hankison pressure swing regenerative desiccant compressed air dryer, model hhe-115, serial # 1473517-1. Features dual desiccant chambers using activated alumina desiccant, rated for 115 scfm @ 100 psi, minimum/ma...

Hammond Drierite Desicant Dryer 105 Tank Vent Dryer #14858

• Manufacturer: Hammond

Storage tank vent dryer by w. A. Hammond drierite co. Ltd. (xenia. Oh) model 105, rated for maximum pressure of 10 psig, vertical painted steel desicant chamber is 8" diameter x 38" tall with 12" x12" plate floor...

Dehumidifier Skid

• Manufacturer: Ajax Tocco

Skid Specs: Control Panel Specs: - Listed Control Panel for Hazardous Locations Lectrodryer A Division of Ajax Magnethermic Corp - Gas-cc - 480 Voltz - 3 Phase - Size 350 - 60 HZ - 500 MAX PSIG Tube Specificat...

DEHUMIDIFIER MODEL DC-75, 115 VAC, 60 HZ, 1/1 HP, 350 PSI

• Manufacturer: OASIS

“MAY HAVE SHELF WEAR” DEHUMIDIFIER MODEL DC-75, 115 VAC, 60 HZ, 1/1 HP, 350 PSI OASIS DEHUMIDIFIERSERIAL NO. 9738528579MODEL DC-75115 VAC 60 HZ9.5 AMPS1/1 HPPH CAP PINTS 75350 PSI LENGTH- 19"WIDTH- 16"HEIGHT- 25...

2007 Netstal Model PET 3500-3550R 350 Ton injection Molding Machine with Mold, Material Dryer and Hopper, Dehumidifier (complete system to produce PET preforms)

• Manufacturer: Netstal

2007 Netstal Model PET 3500-3550R 350 Ton injection Molding Machine with Mold, Material Dryer and Hopper, Dehumidifier (complete system to produce PET preforms) Year of manufacture- 2007 Number of operating hours...