Used Machine Tools in Hesse, Germany

Trusted Seller
1987 MAHO MH 600 T
- Manufacturer: Maho
- Model: MH 600 T
Additional Features Used CNC milling machine equipped with HEIDENHAIN control Accessories Complete electrical equipment, HEIDENHAIN CNC control, coolant system, lighting, horizontal milling attachment with two lo...
Wiesbaden, Germany
Trusted Seller
1988 BOLLA LUX FA 65 SVC
- Manufacturer: Bolla
Add-ons Little-used and very well-maintained CNC-controlled vertical and copy milling machine, equipped with the FIDIA ADDENDUM V 05-E CNC 12 control system, including digitizing and shrinkage measurement. Access...
Wiesbaden, Germany
Trusted Seller
2000 NAGEL SCD 200 1113-235072
- Manufacturer: Nagel
- Power requirement: 12 kW
Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...
Staufenberg, Germany
1982 Reiden BF 4
- Manufacturer: Reiden
Control: Siemens 840 D powerline | X-axis [mm]: 2.000 | Y-axis [mm]: 800 | Z-axis [mm]: 1.000 | Feed (x/y/z) [m/min.]: 6 | Angular range: +/- 90° | Spindle speeds [rpm]: 20 - 2.000 | Spindle power [kw]: 21 | Too...
Oestrich-Winkel, Germany
Trusted Seller
SCHLEITH & Co. No. 5
- Manufacturer: SCHLEITH & Co.
Additional Precision vise for surface grinding machines Accessories Double-sided chip grooves Further information Jaw width 100 mm, jaw height 40 mm, clamping range 125 mm, overall height 80 mm
Wiesbaden, Germany
Trusted Seller
dividing head CARL ZEISS
- Manufacturer: Zeiss
Addition: Very well-preserved optical dividing head Accessories: Centering microscope, center punch, storage box Further information: Table diameter 400 mm, table with 8 12 mm T-slots, height 175 mm, space requir...
Wiesbaden, Germany
Trusted Seller
HOFMANN STH400
- Manufacturer: Hoffmann
Additional Features Very well-maintained horizontal rotary table, manual rotation around the circumference Accessories Three-jaw chuck 315 mm Ø with outwardly stepped jaws Further Information Table size 400 mm Ø,...
Wiesbaden, Germany
Trusted Seller
Rotating, swivel and tilting table DECKEL
- Manufacturer: Deckel / Maho
Add-on Very well-maintained rotary, tilt, and swivel table, suitable for: FP 3 L; FP 3 LG; and FP 3 LV Further information 6 T-slots 16 mm, T-slot spacing 90 mm, horizontal rotation to the right and left by 45° e...
Wiesbaden, Germany
Trusted Seller
AEG DWS 200/630 M
- Manufacturer: AEG
- Model: DWS 200630 M
Additional Workshop Bench Grinder Accessories Grinding wheels, 50% aluminium oxide and 60% coarse silicon carbide
Wiesbaden, Germany
Trusted Seller
1980 PFERD MB 12/120
- Manufacturer: PFERD
Additional Information Used pneumatic grinder, with rotary handle. Further Information Speed 12,000 rpm, power 900 W, 6 mm collet chuck, air consumption approx. 1.3 m³/min, required operating pressure 6 bar, leng...
Wiesbaden, Germany
Trusted Seller
REMA DS 07/200 A
- Manufacturer: Rema
- Model: DS 07200 A
Additional equipment: Used double-head grinder with built-in dust extraction. Accessories: New and slightly worn grinding wheel, spark guard, dust filter.
Wiesbaden, Germany
Trusted Seller
1990 SAV Nürnberg Delphi 1
- Manufacturer: Delphi
Additional Information Barely used, absolutely new combined universal radius and angle dressing machine with punch grinding device Accessories Various accessories Further information Dressing max. dressing radius
Wiesbaden, Germany
Trusted Seller
1983 KIRBA UG 2
- Manufacturer: KIRBA
Additional Features Used, well-maintained graver and single-edge cutter grinder on an original base with built-in dust extraction and a telescopic drawer. Accessories Electrical equipment, lighting, grinding whee...
Wiesbaden, Germany
Trusted Seller
2005 SCHÜCO PBS
- Manufacturer: Schüco
- Model: PBS
Manufacturer: SCHÜCO Model: PBS Type of Machine :Profile Processing System Technical Data - Travel Range: - X-Axis: 6850 mm - Y-Axis: 800 mm - Z-Axis: 500 mm - Rotation: - B-Axis: 0 to 90° continuously adjust...
Frankfurt, Germany
Trusted Seller
2002 DECKEL MAHO DMU 60T 1113-210055
- Manufacturer: Deckel / Maho
- Model: DMU 60 T
5-axis machine Rotary table B-axis Control type: CNC | Control name: Heidenhain TNC 426/430 | Freight basis: FCA | X-off: 630 mm | Y-off: 560 mm | Z-way: 560 mm | Machine weight approx.: 6,5 t | Number of axes: 5...
Staufenberg, Germany