Used Machine Tools in Saxony, Germany

Clamping Units WMW

• Manufacturer: WMW

Diese Spannmittel werden im kg-Preis bei Gesamtabnahme verkauft. Bitte beachten Sie die Ausweisung auf den Fotos!

1980 WMW 640x465x90

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Length: 640 mm | Width: 465 mm | Thickness of clamping plate: 90 mm | Weight of the machine approx.: 70 kg

WMW AP255x140x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

HILMA NC 160

• Manufacturer: Hilma

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 65 kg | Space requirements of the machine approx.: m | Span ...

Ambos WMW

• Manufacturer: WMW

Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm

Ku289

• Manufacturer: Pagus

Magnetic coupling VEM Dessau KLDO5 TGL 22050 ( TGL22050 ) New !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Â Dessau 3KL5 TGL 4734/59 ( TGL4734/59 ) used, repaired, tested!