SHOP BUILT AUGER RIG (SIMILAR TO CME #8944Ta
- Manufacturer: Shopbuilt
Mounted on 1989 Ford F700 2WD truck with gas engine, no angle capability, grouter, 300 gallon water tank, 2 rear hydraulic jacks, 3rd jack just for the bed, running condition Price: $24,500
2018 GEOTECHNICAL CUSTOM BUILT AUGER RIG #325T
Built 2018, auger drill head, core head, auto hammer, 2 winches, 3.25” or 4.25” auger, N or H core rod, two available Price: $87,500 USD IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATIO...

GIDDINGS 2400 LIMITED ACCESS RIG #12740Ta
- Manufacturer: Giddings & Lewis
Mounted on 1990’s Suszuki jeep, all aluminum, Kohler Command 25 engine, rotary head, fully operational Price: $25,000

MOBILE B-61 AUGER RIG #7269Ta
6 cylinder Ford gas engine, mounted on 1979 Ford 9000 tandemax axle truck, new Cat 3208 diesel engine and clutch, Road Ranger transmission, 65' hollow stem augers, slide hammer, set up for split spoon soil augeri...
2010 MOBILE B-54 AUGER RIG #1279Ta
Manufactured 2010, mounted on IHI carrier, 3 winch system (main, auxiliary and wireline), auto hammer, slide base, overhead water swivel, 300 gallon water tank, American Manufacturing piston pump, 8 speed head (m...
Vermeer PD10R Pile Driver
- Manufacturer: Vermeer
- Model: PD10R
- Horsepower: 49 hp
- Operating weight: 7,057.9 kg
Solar Pile Driver, Solar Piling Machine, Guardrail Driver 2019 Vermeer PD10R 20’ Pile Driver Yanmar 4 Cylinder Diesel Meter Reads 2115 Hours Electric Start Autoplum Rubber Tracks Two Speed Crawler Joule 950 1500 ...

CYCLONE 35 COMBINATION CABLE/AUGER RIG #3578T
2 lines, 4 cylinder gas deck engine, 90’ of 4” augers, mounted on GMC single axle truck runs great, deck engine runs great, has issues with brake lines and electronic throttle control Price as is: $47,500 – locat...

1998 CME 55 TRACK MOUNTED AUGER RIG #6813Ta
Built 1998, Completely Rebuilt. Mounted on Morooka 1100 Series tracks, new hoses, new controls, new bearings, new slides, new slutches, cylinders repacked, new excavator dab, etc. Quick connect mast, 3 winches (1...

1984 INGERSOLL RAND A-200 AUGER RIG #2871T
- Manufacturer: Ingersoll Rand
Built 1984, trailer mounted, 10’ stroke, Perkins/Detroit diesel engine, safety hammer, includes 20’ of 3-1/4” hollow stem auger Price on Request or Make Reasonable Offer
Oceanside, NY1994 MOBILE B24 LOW CLEARANCE AUGER RIG #4201T
Manufactured 1994, good for low clearance, only 180 hours, Detuz Z790 diesel deck engine, cathead, rig mounted on square box frame with jacks, working condition Price: $15,500 INGERSOLL RAND A300 AUGER DRILL RIG
Orteco Pile Driver
- Manufacturer: Orteco
2013 Orteco FEX 1000 3.3 Ton Pile Driver Hatz Diesel 3L41C 44,2 HP Electric Start Rubber Tracks Two Speed Crawler Joule 1060 680/720 Blows per Minute Maximum Pile Diameter 8” Maximum Pile Length 15′ Machine Weigh...
- Trusted Seller

2003 Ice 22-30
- Manufacturer: ICE
- Model: 22-30
- Hours: 3,083 h
Used ICE 22-30 Vibratory Piling Rig for sale. 3,083 Hours 325 Power unit Caterpillar 3306TA, 325 HP @ 2,200 RPM, 10.5 L, Tier 2 compliant Total Weight = 18,600 lbs.
- Trusted Seller

2014 Ice 14D
- Manufacturer: ICE
- Hours: 1,135 h
Used ICE 14D Vibratory Piling Rig for sale. 1,135 Vibro Hours 4,500 Power Unit Hours 230G Power unit CAT C6.6, 225 HP, EPA Flex compliant Total Weight = 13,245 lbs.
- Trusted Seller
$750,000 USDSavannah, GA - Trusted Seller

2007 Soilmec 7T-800.1
- Manufacturer: Soilmec
- Horsepower: 820 hp
- Hours: 1,572 h
Used Soilmec 7T-800.1 Piling Accessory for sale. 1,572 Hours High-Pressure Injection Pump Diesel Engine
- Trusted Seller

2014 Ice 14D
- Manufacturer: ICE
- Hours: 1,135 h
Used ICE 14D Vibratory Piling Rig for sale. 1,135 Vibro Hours 4,500 Power Unit Hours 230G Power unit CAT C6.6, 225 HP, EPA Flex compliant Total Weight = 13,245 lbs.

Soilmec R-825 Piling Rig
- Manufacturer: Soilmec
- Model: R-825
Good condition Soilmec R-825 Piling Rigs manufactured in 2000. Located in USA and other countries. Click request price for more information.
USA

