Used Processing in Germany

Corundum stone mill - 20846
- Manufacturer: PROXES Fryma/Koruma
capacity 10 - 160 L/hr depending on product jacketed for cooling size range 150–40 µm (micron) 2.2 kW, 2800 rpm, 415 volt 3 phase for dispersion and wet milling of liquid, viscous and pasty products
Willich, Germany
Puffed rice plant for puffed rice - 29886
- Manufacturer: ENGI TECHNOLOGIES
Puffed rice machines for various formats. Please inquire about your desired format so we can offer a suitable solution.
Willich, Germany
Waffle cone oven for waffle cones - 20759
- Manufacturer: G.A.M. / Steinhoff GmbH / HAAS
output: approx. 4,500 pcs/h cone lengths: 115, 125, and 135 mm connection: 380 V 3 units available price is per unit ex works
Willich, Germany
roasting plant - 20539
- Manufacturer: Brovind - GBV Impianti srl
made in 2016 BUT was only 20 shifts in production that is why the line is still like new made capacity 2 batches each 50 kg hazelnuts / 100 kg/h with frame with cyclon complete undismantled ex Europe
Willich, Germany
Ed. Haas Austria GmbH SWAE 30, AWSTB
- Manufacturer: Haas
wafer line consisting of: 2 pcs. wafer ovens HAAS type SWAE 30 electrically heated fine square, 30 wafer plates each oven 1 pcs. wafer sheet cooler 1 pcs. HAAS wafer creaming machine type AWSTB 1 wafer cut...
Willich, Germany
1989 CLOCK 21.4826
- Manufacturer: UHR
Ø approx. 1.1 m, height approx. 2.4/1.0 m, outlet DN 200, rotary valve
Meinerzhagen, Germany
1997 WEBAC through-flow cooler WASK-100
- Manufacturer: Webac
continuous throughput up to 90 t/h, mixer/cooler drive power 45 kW, blower drive power 37 kW, mixing tools, PLC control SIEMENS S7 (2007)
Meinerzhagen, Germany
NN Hammermühle
- Manufacturer: NN
for shredding of soft to medium-hard material such as grains, cereals, biomass, wood chips or feed. How it works: 4 rotating hammers strike the material to be shredded against a sieve
Willich, Germany
Herbort - Spare parts for cutting machines, type 122, 120 N, etc
- Manufacturer: Herbort
for cutting machine 122 N: Circular knife shaft complete with 91 knives - 2.8 mm cut, Flat knife - holder without knife for 2.8 mm cut, Round knife - shaft with nut, without knife, Mincer shaft pitch 28 for 1...
Willich, Germany
1979 AXMANN TURBOMIX TMV 5 CB
- Manufacturer: Axmann
Single-joint design, upright, dosing pumps and valves, mixing capacity 5 t/h, projection 2.5 m, discharge height approx. 1,200 mm, connected load 10 kW, connected loads 400 V, 50 Hz, control system
Meinerzhagen, Germany
2008 F.A.T. Combimix-2000 DF30/4500/2000
- Manufacturer: F.A.T.
Double-joint design, vertical, sand dosing slide, additive dosing pumps/valves, flow meters, mixing capacity 25 t/h, throat depth 4.5 + 2.0 m, discharge height approx. 2,000 mm, connected load 33 kW, swivel drive...
Meinerzhagen, Germany
2010 F.A.T. COMBIMIX DS60
- Manufacturer: F.A.T.
Double-joint design, upright, dosing pumps and valves, mixing capacity 40/60 t/h, feed screw conveyor, radius 4.5 m, mixing arm, radius 3.0 m, discharge height 3.3 m, connected load approx. 54 kW, platform, sand ...
Meinerzhagen, Germany
1991 AXMANN TURBOMIX TMS 10
- Manufacturer: Axmann
Double-joint design, upright, capacity approx. 10 t/h, throat depth 2.5 + 1.0 m, double mixing arm (premixer) 2x 2.2 kW, turbo mixer 7.5 kW, additive dosing pumps 2x 0.6 kW, PLC control system
Meinerzhagen, Germany
cutting machine - 20838
- Manufacturer: "Spomasz"
cutting machine for marshmallows, bird's milk, and many other products that need to be cut from a carpet for longitudinal and cross-sectional cutting good condition ex location
Willich, Germany
Washing drum for almonds - 20548
- Manufacturer: Bauermeister
As used to wash almonds Drum is stainless 7,5 KW, 380 V Size 3000 x 900 x 1500 mm Ex location Germany
Willich, Germany
Krones Canmatic Labeler
- Manufacturer: Krones
- Model: Canmatic
Good condition Krones Canmatic Labelers available between 1995 and 2001 years. Located in USA and other countries. Click request price for more information.
USA