- Trusted Seller
A&B Processing Systems Receiver Tank
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
2021 P/A Industries SS89LASTL
- Manufacturer: PA Industries
Manufacturer P/A Industries Model SS89LASTL Type Pallet Reel Straightener Coil Type Pallet-mounted coil (horizontal payoff design) Max Coil Width Approx. 18–24 in. (depending on configuration) Max Coil OD Approx....
- Trusted Seller
2025 LaON Technology Pilot
- Manufacturer: LaON Technology
Four-lane carbide knife cutting with ±0.1mm accuracy and <20μm burr specification Wheel-type knife system with AC reversible motor drive and fixed block configuration EPC system with speed control motor for elect...
- Trusted Seller
2014 Spider SC1500;SR;50Hz
- Manufacturer: Spider
14 x 12 x 24 in Machine type: Other Process | Machine location: Washington | Stock #: 438670 | Rated for: 1500 lbs. | Weight: 105 lbs
- Trusted Seller
2006 Vision Engineering Hawk MKII
- Manufacturer: Vision Engineering
Dynascopic viewing head with crosshair reticle Hawk metrology stand (3-axis) with LED substage illumination (manual operation) Power cable for Hawk head 3-channel LED illumination controller for manual systems I/...
- Trusted Seller
1989 Hex Industries VAC-836-FT
- Manufacturer: Hex Industries
Equipment Overview Passive vaporizer using ambient air convection across finned tubes for vaporizing cryogenic liquids. Key Features & Specifications • 10,000 SCFH • 400 PSIG pressure • Finned tube design • Natur...
- Trusted Seller
2021 Matrix MX370P
- Manufacturer: Matrix
Speed 10 m/min (33 ft/min) Film Width 340 mm (13″) Sheet Width 420 mm (17″) Paper Weight ≥ 135 gsm Temperature 0–140 °C Control Multilingual LCD, semi-auto feed, auto separator Power 220–240 V, ~13 A, 2.2 kW Size...
- Trusted Seller
2020 Turfco Torrent 2
- Manufacturer: Turfco
- Model: TORRENT 2
Model Torrent 2 Debris Blower (#85651) Width Outside of tire to outside of tire – 48” (1.22 m) Height Nozzle pointed up – 40.5” (1.03 m), To top of engine – 36” (0.92 m) Length Hitch to end of chute – 108.8” (2.7...
- Trusted Seller
2023 Key Technologies PulseScrubber Continuous Polisher
- Manufacturer: Key Technologies
Manufacturer Key Technologies Model PulseScrubber Continuous Polisher Type Continuous rotary polisher / scrubber Material of Construction Food-grade stainless steel Operation Type Continuous, fully automatic Typi...
- Trusted Seller
2021 P/A Industries SRWD-2-LC2
- Manufacturer: PA Industries
Manufacturer P/A Industries Model SRWD-2-LC2 Year 2021 Reel Capacity Approx. 2,000 lb (varies by configuration) Coil Width Capacity Up to 20 in. (typical) Coil OD Capacity Up to 48 in. (typical) Feed Direction Le...
- Trusted Seller
2023 MMLJ DB800XL
- Manufacturer: MMLJ
300 CFM Compressor 9,100 lb Fully Loaded Weight (estimated) DB800® Blast Pot 90 min Continuous Blast Time Abrasive Capacity 300 lbs Nozzle SLV #6
- Trusted Seller
2019 Hennecke MicroLine 45 R/MT
- Manufacturer: Micro Line
1 metering unit for Polyol with an HP 2 metering pump, max. nominal output approx. 54 cm3 /sec at 2.6 kW/1800 min-1 1 metering unit for Isocyanate with an HP 2 metering pump, max. nominal output approx. 54 cm3 /s...
- Trusted Seller
Water Maze HBG-30D
- Manufacturer: Water Maze
Foam lance holder set Water Maze Power supply (Ph/V/Hz) 1 / 120 / 60 Amps (A) 3 Flow Rate (gal/h) max. 24 BTU 311000 Container capacity (gal) 100 Exhaust Stack diameter (in) 10 Weight without accessories (lb) 13...
- Trusted Seller
1995 Anguil SCFM
- Manufacturer: Anguil
This skid-mounted catalytic oxidizer is designed to handle up to 1,500 SCFM of standard emissions as well as chlorinated compounds. Rebuilt in 2017 with updated controls and new catalyst in 2021, this system has...
- Trusted Seller
2024 Ramco MK30EBSS
- Manufacturer: Ramco
Tank Size (Int.) 30″ × 22″ × 21″ Working (Basket) Zone 28″ × 17″ × 13″ Liquid Capacity 40 gallons Load Height 30.6″ Machine Footprint 33″ × 29″ × 57″ Agitation Speed 240 strokes/min (with dual-mode) Construction ...
Ingersoll Rand NVC500 Dryer
- Manufacturer: Ingersoll Rand
- Model: NVC500
Good condition Ingersoll Rand NVC500 Dryers manufactured in 2017. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
