Used Processing in Japan

2003 [YS Sten] Filtrate receiving tank (horizontal)
- Manufacturer: Wyeth, Sten.
0.27 m3 Teflon coating inside Material: Gluing section SUS | Quantity saved: １
Hiroshima, Japan
Iwai Machine Vertical cylindrical type
- Manufacturer: Iwai Machinery
Material: SUS316L Purchasing area: 60Hz | Material: SUS316L | Quantity saved: 1
Hiroshima, Japan
200L Cylindrical vertical type
Upper and lower mirror Material: SUS | Quantity saved: One
Hiroshima, Japan
420L Cylindrical vertical
Upper and lower mirrors φ700 × 1362 Made in 2004/8
Hiroshima, Japan
500 L cylinder vertical type
- Manufacturer: Cylindrical vertical type
Wetted part material: SUS Material: SUS | Quantity saved: One | Size: External dimensions: φ800×1000H (straight body)
Hiroshima, Japan
Showa Chemical Machine Cylinder Vertical
- Manufacturer: Showa Chemistry Machinery
Sealed structure, sanitary (ALLSUS), with casters Buffed and polished tank inner surface Jacket: No Agitator: No Shape: Upper mirror lower cone
Hiroshima, Japan
2012 Ogawara Works HDS-100
- Manufacturer: Okawara Works
Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...
Hiroshima, Japan
2012 [Mino Ceramics] Cart-type electric kiln
- Manufacturer: Mino
Operating temperature: 1000°C for normal use Utility (compressed air) Electric capacity: 51kw
Hiroshima, Japan
1997 Kyoritsu Koki 3000L
- Manufacturer: Kyoritsu Koki
Material: Wetted parts SUS304 With drawings Power: 11kw(eG3) | Material: Wetted part SUS 304 | Quantity saved: One
Hiroshima, Japan
Reaction can 3000L
- Manufacturer: Daiichi Bussan Co.
Material: Wetted parts SUS304 Power: 3.7kw | Material: Wetted part SUS 304 | Quantity saved: One
Hiroshima, Japan
1997 Noma Kikan 4000L
- Manufacturer: Noma Kikan
Material: Wetted parts SUS316 (coil: SUS316). Motor stored separately (d2G4 explosion-proof). Drawings available.
Hiroshima, Japan
1997 Kyoritsu Koki 5000L
- Manufacturer: Kyoritsu Koki
Material: wetted part SUS Power: 5.5kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Tada chemical equipment industry 50L
- Manufacturer: Daiichi Bussan Co.
Enclosed upper and lower mirrors With Bayer cyclo reducer Shaft seal gland packing Remarks *Pinhole test & repair will be installed if necessary.
Hiroshima, Japan
1977 Shinko Fowdler 300L
- Manufacturer: Shinko
Max. working pressure Body: 3.0 kg/cm2 Jacket: 3.0 kg/cm2 Glass: 3300 Jacket, agitator, and stand included Remarks *Pinhole test & repair will be installed if necessary.
Hiroshima, Japan
Dye light PP tank
- Manufacturer: Dilight
1400 Φ × 1500 H Upper open Material: PE | Quantity saved: 3 units
Hiroshima, Japan