Used Sheet Metal Processing

H&M HS-3S 4ft x 14 ga Box and Pan Brake w/ Foot Clamp

The HM Machinery HS-3S 4ft x 14 ga Box and Pan Brake w/ Foot Clamp is a large scale brake with angled segmented tooling, designed for the fabrication both straight and box and pan profiles. The HS-3S brake is a d...

U14786C GMC 4 ft 12 gauge box and pan brake

• Manufacturer: GMC

H&M HS-3S-3SH 4ft x 12 ga Universal Manual Brake

The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces. The HS-3S-3SH brake allows bending in inverse directions, enabling special profiles, suc...

Malco MB48B

• Manufacturer: Malco

The MB48B “Pan Style” Mini-Brake is designed to fabricate drip pans and register boxes, as well as complex corners for flashing and fascia, on the job. The MB48B “Pan Style” Mini-Brake is designed to fabricate dr...

U14829C Geothermal Flush Cart with 1-1/2″ Hoses and 1-1/4″ Ball Valves – 1.5 HP 115V

The Geo-Flo Flush Cart is the professional’s choice to purge air and flush debris from residential and light commercial geothermal ground loops. The Flush Cart includes all the important features required to safe...

U14822C Azimuth H612 clincher

GP334 12 Ga Gooseneck die 10 ft long

10 ft long GP334 Gooseneck Punch 1/16 inch radius x 90-degree nose rated for 12 gauge material

Tin Knocker Model 1660 Beader

• Manufacturer: Tin Knocker

A one man operation, this heavy duty 16ga beader comes with five sets of bead tooling that can be located anywhere over the 60″ working length and replaced if damaged. 1 HP/115 single phase.

GP1 9 Ga Gooseneck die 10 ft long

GP1 Gooseneck Punch – Airforming 3/32 inch radius x 85-degree nose rated for 9 gauge material

U14591C MG model MH 206P 4 roll plate roll

Model: MH 206 Manufactured: 2009 Condition: Used Specifications: sheet width: 80 inches plate thickness: .236 in. pre-bending: ...

5' X 2" HAUSLER 3 ROLL HYDRAULIC PLATE ROLL

• Manufacturer: HAUSLER

1972 HAUSLER VRM Hydraulic Plate Roll available. Bends up to 60" width and 2" thickness. 60HP main drive, cone bending feature. Ideal for precise 514 material bending. Used, professional grade equipment. Material...

U14555C Chicago 416 straight brake

ITEM # : U14555c MODEL # : 416 CAPACITY: 48 inch 16 gauge LOCATION : Kent, WA.

U14551 Roto-die model 15

MODEL # : 15 ITEM # : U14551 POWER # : 220/230V 3 PH. LOCATION : Kent, WA. No upper dies included with machine. **To add a new #24 hemming die and #1 forming die. add $5200.**

U14682C Chicago 4 ft 16 gauge straight brake

• Manufacturer: Dreis & Krump

ITEM : U14682C MODEL : 416 LOCATION : Kent, WA

U14720C Lockformer 16 gauge pittsburgh w/ 3in1 rolls

• Manufacturer: Lockformer

Item: U14720C Model: 16 Location: Portland , OR Capacity: 16 gauge Power: 230v 3 ph Includes 3 in 1 rolls