Category

Country

  • 1995 17" X 67" KINGSTON HJ-1700 HIGH SPEED PRECISION ENGINE LATHE, 1995'

    No price - Medina, MN Recently Added
    • Manufacturer: Kingston
    • Spindle Bore: 2-1/4"
    • Distance between Centers: 67"

    equipped with: 10" 3-jaw chuck carriage stops thread chasing dial foot brake system coolant system with pump and piping full length splash guard telescopic taper turning attachment quick change too...

  • 2000 Kingston CL38C-2000 24384

    No price - Melville, NY
    • Manufacturer: Kingston
    • Spindle Bore: 7.1"
    • Distance between Centers: 84.6"

    fanuc 0t cnc control 24" 4-jaw air chuck steady rest in plant under power

  • Kingston HP-3000 Big Bore Engine Lathe

    $69,900 - Sanford, FL
    • Manufacturer: Kingston

    2011 kingston hp-3000 big bore engine lathe specifications: swing over bed                                     24" swing over cross slide                         16.5" swing in gap                 ...

  • KINGSTON HK-3000, 30"SWING, 120"CC, 12"HOLE, INCH/METRIC, TAPER, 2-CHUCKS, REFURBISH, 16

    No price - Deer Park, NY
    • Manufacturer: Kingston
    • Distance between Centers: 120"
    • Spindle Nose: A2-20

    kingston hollow spindle lathe specifications: swing over bed........................ 30" swing over cross slide................ 20-3/4" spindle nose camlock.................. a2-20 hole through spi...

  • 2007 Kingston HR3000

    $35,000 - South El Monte, CA
    • Manufacturer: Kingston
    • Distance between Centers: 120"
    • Spindle Nose: D1-11

    25" 4 jaw chuck sliding chuck guard tool post (2) steady rests foot brake tracer attachment trav- a -dial on carraige 2 speed tailstock coolant system

  • Kingston HR-3000

    $47,500 - Santa Ana, CA
    • Manufacturer: Kingston

    equipped with: front chuck 4 jaw 24”od 7” id rear 3 jaw scroll 12.5”od 4”id 13” capacity roller steady rest gap bed aloris tool post coolant pump and chip pans

  • 1987 Kingston HL2500 21"x100"

    No price - Dundee, FL
    • Manufacturer: Kingston
    • Spindle Bore: D1-8 Camlock / 3.125"
    • Spindle Nose: D1-8 Camlock / 3.125"

    equipment: 12" 4 jaw chuck taper attachment toolpost tailstock steady rest hardened & ground bedways 460 volt electrics coolant system with pump | chuck size: 12" 3 jaw | swing in gap: 28.125" | w...

  • KINGSTON HJ-1100 GB ENGINE LATHE HIGH SPEED PRECISION GAP BED 17″ X 43″

    $16,300 - Bethlehem, PA
    • Manufacturer: Kingston
    • Spindle Bore: 2-1/4″
    • Distance between Centers: 43-1/2″

    specifications swing over bed: 17″ swing over cross slide: 10-9/16″ swing over gap: 24″ length in front of face plate: 5-7/8″ height between floor surface and center line: 42-3/8″ distance between ...

  • KINGSTON HJ-1700 GB ENGINE LATHE HIGH SPEED PRECISION GAP BED 17″ X 67″

    $18,200 - Bethlehem, PA
    • Manufacturer: Kingston
    • Spindle Bore: 2-1/4″
    • Distance between Centers: 67″

    specifications swing over bed swing cross slide: 10-9/16″ swing over gap: 24″ length in front of face plate: 5-7/8″ height between floor surface and center line: 42-3/8″ distance between centers: 6...

  • KINGSTON HJ-1700 GB ENGINE LATHE HIGH SPEED PRECISION GAP BED 17″ X 67″

    $18,200 - Bethlehem, PA
    • Manufacturer: Kingston
    • Spindle Bore: 2-1/4″
    • Distance between Centers: 67″

    specifications swing over bed swing cross slide: 10-9/16″ swing over gap: 24″ length in front of face plate: 5-7/8″ height between floor surface and center line: 42-3/8″ distance between centers: 6...