Used dimension in Wallonia, Belgium

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Small grinding table with exhauster

Useful dimensions: width 800 mm, depth: 800 mm Motor 0,25 kW, 220/380 V Grinding table with exhauster, outlet inside 200 mm x 250 mm With grating

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Small vibrating dose conveyor

• Manufacturer: Kleine

Magnet vibrator Weight: ± 300 kg | Outside dimensions: 2.600 mm x 630mm, h. 650mm | Inside dimensions: ± 2300mm x 200mm, h. 60mm | Motor sinex, serial number: 28463A3, 220/380 V

2 lifting bails for small casting ladles, ± 60 kg

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously

Small hopper with discharging belt EA 1450mm

Motor 2 hp, 220/380 V, 1415 rpm Band width 500 mm 6 rolls width 600 mm Driven by one trapez belt, flat gear

Small casting ladles ROPER, 300 kg

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm

Small electric warm air blower 18 KW

ANDREWS Type : DE95, serial number : 8031 18 kW, 380 (triphase) V With 4 stepping switchs, installed on wheels With long cable and connector With a small blower

Small electric heater, 3000 W, S. PLUS

With support for the wall Weight: 3,5 kg | External dimensions: 500 mm x 310 mm, h. 65 mm | Motor: 3 kW, 3000 W

Small screw conveyro, 920 mm, Ø 145 mm

• Manufacturer: Kleine

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

Small dust collector, 1,1 kW

• Manufacturer: ERNST SCHMIDT

Filter surface ± 2m² Intake manifold, Ø 100mm With switch With dust drawer

Small cyclone with motor

Ø exit 155mm heavy parts Ø exit 110mm dust Ø input 240mm Please see photo for model

Smal furan sand mixer 1-2t/h

• Manufacturer: Borden

Dimensions: Lenght: 1800mm; Width: 650mm Usabul dimensions: Lenght: 830mm; Ø180mm Motor: Brand: Weg; 4KW; 960r/min; 220/380V With steering bearing for mounting suspendet or up foot, Overhauled with new pumps and ...

2010 Pneumatic conveyor 30l HENSEL with small hopper

• Manufacturer: HENSEL

Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor