- Trusted Seller

Single roller mill 18″x4′ Krupp brand
- Manufacturer: Krupp
Single roller mill 18″x4′ Krupp brand Brand: Krupp With feeder. PCP
Hermosillo, Mexico - Trusted Seller
Krupp DBst
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 153 mm | Can height min.: 170 mm | Can height max.: 290 mm | Can / ends diameter maximum: 153 mm | Can shape: round | Speed (up to): 100-220 cans per minute
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt
- Manufacturer: Krupp
- Model: SDVT
Speed (up to): 40 sheets per minute | Sheet length max.: 1000 mm | Sheet width max.: 1000 mm
Middelharnis, Netherlands - Trusted Seller
Krupp DBst
- Manufacturer: Krupp
- Model: DBST
Tooling: 127 mm | Can height min.: 127 mm | Can height max.: 236 mm | Can shape: round | Speed (up to): 60-180 cans per minute
Middelharnis, Netherlands - Trusted Seller
Deinze, Belgium - Trusted Seller
1971 Krupp DBst
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 42 mm | Can shape: round | Speed (up to): 400 cans per minute
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II
- Manufacturer: Krupp
- Model: SDVT
Pre-owned duplex slitter with feeding unit. The duplex slitter is equipped with a tandem axis frame for the second slitting operation, significantly reducing the time needed to adjust the can height. Especially u...
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II R
- Manufacturer: Krupp
- Model: SDVT
Pre-owned double slitting machine with automatic sheet feeder. The in total approx. 29 set of knives can be adjusted hydraulically.
Middelharnis, Netherlands - Trusted Seller

Press line (81) Raskin/Krupp
- Manufacturer: Krupp
Virtual tour of the press line Last overhaul 2016, consisting of: Slewing jib crane, Pfeiffer, type PSE 360XX3500, built 1985, SN 7081, load capacity 1,600 kg, radius 3,500 mm, with crane hook block Board automat...
Germany - Trusted Seller

Plan and boring head from Krupp - SK50 7542
- Manufacturer: Krupp
boring head, spindle head, drilling head, recessing head, recessing head, spindle drilling head, boring head -Case
Wiefelstede, Germany - Trusted Seller

Plan and boring head by Krupp - SK50 7529
- Manufacturer: Krupp
boring head, spindle head, drilling head, recessing head, recessing head, spindle drilling head, boring head -Case
Wiefelstede, Germany - Trusted Seller

1978 KRUPP PEDRN-100
- Manufacturer: Krupp
pressure 100 t throat - mm stroke 8 - 116 mm total power requirement 8 kW weight of the machine ca. 7,5 t dimensions of the machine ca. ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Strok...
Gorxheimertal, Germany - Trusted Seller

KRUPP PST-A 160
- Manufacturer: Krupp
- Model: PST-A 160
- Stroke length: 210 millimeter
The was produced in 1980. The machine has a pressing force of 160 tons, while the cutting force is 400 KN. The press can work on 11 stages, including the cutting stage. The ram is capable of 15-75 strokes per min...
$246,180 USDJelenia Góra, Poland 
2 x Krupp/ 4 x Weingarten Press Line
- Manufacturer: Krupp
- Capacity: 500,000 kilogram
- Stroke length: 500 millimeter
2 x Krupp 500 ton Single Action Mechanical Presses 4 x Weingarten 500 ton Single Action Mechanical Presses Complete with 2 moving bolsters, cushions and overload devices
Germany- Trusted Seller

1972 KRUPP PDqV 4-500
- Manufacturer: Krupp
After the GO in 2008 the press was in operation for a maximum of 100 hours. In the years 1972-208 the press was in operation for two shifts.
Brno, Czech Republic 
Krupp SDVT Bending & Forming
- Manufacturer: Krupp
- Model: SDVT
Good condition Krupp SDVT Bending & Formings manufactured in 1981. Located in Netherlands and other countries. Click request price for more information.
Netherlands

