Building Filters
2017 Kuhn KUHN SPW19
- Manufacturer: Kuhn
- Capacity: 19 cubic metre
2018 KUHN SPW19 INTENSE SELF-PROPELLED TRUCK ENGINE REPLACES ENGINE HOUR 3000H HOUR MACHINE 9000 19 M3 DOUBLE AUGER SELF-LOADING MILLING CUTTER CONVEYOR FOR UNLOADING FROM BOTH SIDES HATCHES ON CONVEYOR 2 SPEEDS,...
2014 Kuhn GA 8731
- Manufacturer: Kuhn
- Model: GA 8731
- Working width: 8.7 meter
- Windrow width: 8.7 meter
Dual-rotor rake Tandem axle + 2 front wheels, i.e.: (6 total) Hydraulic working width adjustment Electrical control unit in the cab Wide transport wheel STABILIFT (Rotor locking) STABIDRIVE (Road tracking and sta...
2013 Kuhn FC 313 FF
- Manufacturer: Kuhn
- Model: FC 313 FF
- Cutting width: 10.170603674540683 foot
- PTO Power Requirement: 70 horsepower
Pendulum system Lift Control suspension NON STOP safety Flexible V-finger Equipment available by the end of September 2025 ( Very clean equipment from a private owner )
2021 Kuhn GMD 3125
- Manufacturer: Kuhn
- Model: GMD 3125
- Working width: 3.1 meter
- Cutting width: 3.1 meter
New maintenance-free OPTIDISC cutters Very clean and available September 2025
2017 Kuhn GMD 3511-FF
- Manufacturer: Kuhn
- Model: GMD 3511
- Cutting width: 3.5 meter
- Hitch category: Category 3
Lamier replaced with a new one in 2022 Description of the equipment: GMD 3511 FF | Mark: KUHN | Year: 2017 | Cutting width: 3,50 m | Number of plates: 8 | Quick knife removal: Yes | Power take-off speed: 1000tr/m...
2024 Kuhn GMD 3125 FF
- Manufacturer: Kuhn
- Model: GMD 3125
- Working width: 3.1 meter
- Cutting width: 3.1 meter
New maintenance-free OPTIDISC cutter bar New machine from dealership stock Available immediately
Étrelles, France
2021 Kuhn GMD 3511-FF
- Manufacturer: Kuhn
- Model: GMD 3511
- Cutting width: 3.5 meter
- Hitch category: Category 3
Description of the equipment: GMD 3511 FF | Mark: KUHN | Year: 2021 | Cutting width: 3,50 m | Number of plates: 8 | Quick knife removal: Yes | Power take-off speed: 1000tr/min | Approximate year: No
2019 Kuhn GMD 3125 F
- Manufacturer: Kuhn
- Model: GMD 3125 F
- Cutting width: 3.1 meter
- Hitch category: Category 3
New maintenance-free OPTIDISC ELITE cutter bar Description of the equipment: GMD 3125 F - FF | Mark: KUHN | Year: 2019 | Cutting width: 3,10 m | Number of plates: 7 | Quick knife removal: Yes | Power take-off spe...
2022 Kuhn SPW 16.2 CS
- Manufacturer: Kuhn
- Model: SPW 16
- Tire size: 445/45 R19.5
- Capacity: 16 cubic metre
Crate capacity 16 m3 at conveyor outlet. 6-cylinder 240 HP VOLVO engine with programmable revs Phase 5 VOLVO AdBlue Vertical 2-screw mixing system, continuously variable from 0 to 55 rpm. MAGNET for 1 screw 2 dis...
Étrelles, France
2022 Kuhn SPW 16.2 CS
- Manufacturer: Kuhn
- Model: SPW 16
- Tire size: 445/45 R19.5
- Capacity: 16 cubic metre
Crate capacity 16 m3 at conveyor outlet. 6-cylinder 240 HP VOLVO engine with programmable revs Phase 5 VOLVO AdBlue Vertical 2-screw mixing system, continuously variable from 0 to 55 rpm. MAGNET for 1 screw 2 dis...
Étrelles, France
2021 Kuhn MéTRIS4102
- Manufacturer: Kuhn
- Model: METRIS 4102
- Tank capacity: 4,100 liter
- Boom width: 28 meter
CONTINUOUS TRAFFIC | GPS SECTION CUT-OFF | INCORPORATOR | TAIL AXLE | ISOBUS 9 SECTIONS 340/85R48 Tires Centrifugal Pump Flow Rate 500L For more photos, please contact me
2007 Kuhn GA7301
- Manufacturer: Kuhn
- Model: GA 7301
- Working width: 7.3 meter
- Machine weight: 1,580 kilogram
Working width: 7.3m
2012 Kuhn Haybob 360
- Manufacturer: Kuhn
- Model: HAYBOB 360
- Working width: 3.6 meter
Haybob 360 double-rotor windrower Windrowing working width 3.60 m Tedding working width 3.00 m Pivoting headstock Equipment in very good condition, used very few years. Customer depot Available immediately
$2,950 USDBrécé, France
2020 Kuhn GMD 3111
- Manufacturer: Kuhn
- Model: GMD 3111
- Working width: 3.1 meter
- Cutting width: 3.1 meter
Adjustable hitch pins for lateral offset as standard 7 discs screwed to drive units, with treated steel skid plates QUICK KNIFE ATTACHMENT PROTECTADRIVE system (gear train protection) Reinforced bearings, disc ho...
2010 Kuhn VM 182
- Manufacturer: Kuhn
- Model: VARI-MASTER 182
- Horsepower: 209.19944585963398 horsepower
- Working width: 3 meter
Variable width plough from 12 to 19 inches in 7 bodies ( 5 E + 1+1) POSSIBILITY OF 6 Bodies Coupling bar diameter 60 One-piece front axle with adjustable towbar OPTIDRIVE head suspension 140 mm diameter stub axle...